emmc from huawei mate 20 lite hi ALL
i have a emmc from huawei mate 20 lite and i need read thhe emmc chip, but the sw see like a dead emmc.
i tried with a different vendor but the answer is the same
eMMC_tool Suite ver. 1.6.2.0 (release date: 30.06.2019)
Microsoft Windows 7 (32 bit) build 7601 (6.1.7601.18015)
Looking for EasyJTAG box...
EasyJTAG API ver. 3307
EasyJTAG Box Serial = 42062D4361FF9492
Card Serial = AAAA220E
EasyJTAG Box Firmware = 2.44
Changelog:
30.06.2019 (ver 1.6.1.0)
Fix: Bugs that have been found through your crash report
Setting interface to EasyJtag2/E-Socket
Setting bus width to 4 Bit
Setting frequence to 14 MHz
Can't init device. Reason: OCR Ready Timeout Error [Check VCC or eMMC DEAD]
Can't init device. Reason: OCR Ready Timeout Error [Check VCC or eMMC DEAD]
Can't init device. Reason: OCR Ready Timeout Error [Check VCC or eMMC DEAD]
Setting interface to EasyJtag2/E-Socket
Setting bus width to 4 Bit
Setting frequence to 14 MHz
Can't init device. Reason: CMD Timeout Error
Canceled
Setting interface to EasyJtag2/E-Socket
Setting bus width to 4 Bit
Setting frequence to 14 MHz
Can't init device. Reason: CMD Timeout Error
Canceled
Setting interface to EasyJtag2/E-Socket
Setting bus width to 4 Bit
Setting frequence to 14 MHz
Can't init device. Reason: CMD Timeout Error
Canceled
Setting interface to EasyJtag2/E-Socket
Setting bus width to 4 Bit
Setting frequence to 14 MHz
Can't init device. Reason: CMD Timeout Error
Can't init device. Reason: OCR Ready Timeout Error [Check VCC or eMMC DEAD]
Can't init device. Reason: OCR Ready Timeout Error [Check VCC or eMMC DEAD]
Setting interface to EasyJtag2/E-Socket
Setting bus width to 4 Bit
Setting frequence to 14 MHz
Can't init device. Reason: OCR Ready Timeout Error [Check VCC or eMMC DEAD]
Can't init device. Reason: OCR Ready Timeout Error [Check VCC or eMMC DEAD]
Can't init device. Reason: OCR Ready Timeout Error [Check VCC or eMMC DEAD]
Setting interface to EasyJtag2/E-Socket
Setting bus width to 4 Bit
Setting frequence to 14 MHz
Can't init device. Reason: OCR Ready Timeout Error [Check VCC or eMMC DEAD]
Can't init device. Reason: OCR Ready Timeout Error [Check VCC or eMMC DEAD]
Canceled |