View Single Post
Old 11-08-2019, 15:33   #97 (permalink)
parsa_dig
Freak Poster
 
parsa_dig's Avatar
 
Join Date: Mar 2010
Location: Earth
Age: 39
Posts: 319
Member: 1265640
Status: Offline
Sonork: 100.1622602
Thanks Meter: 51
how to make dump from devices with UFS chip?
for example, I have SM-G930V
Quote:
LUN 0:
Block size: 0x1000
Size: 0x76F000000 / 29,752,000,000B / 29GB
LUN 1 (Boot A):
Block size: 0x1000
Size: 0x400000 / 0,004,000,000B / 4MB
LUN 2 (Boot B):
Block size: 0x1000
Size: 0x400000 / 0,004,000,000B / 4MB
LUN 3:
Block size: 0x1000
Size: 0x3C00000 / 0,060,000,000B / 60MB
Number of W-LUs found: 1
W-LUN 0xC4 (REPORT LUNS):
Block size: 0x100
Size: 0x400000 / 0,004,000,000B / 4MB
here is 4 LUs with:
Quote:
LUN0 Have 16 partitions
LUN1 Have 1 partitions
LUN2 Have 1 partitions
LUN3 Have 21 partitions
with 39 partion
Quote:
LUN0 (MODEMST1) [0x108000 0x180000] Size: 1.500MB
LUN0 (MODEMST2) [0x288000 0x180000] Size: 1.500MB
LUN0 (FSC) [0x408000 0x1000] Size: 4.0KB
LUN0 (SSD) [0x409000 0x2000] Size: 8.0KB
LUN0 (PERSIST) [0x40b000 0x2000000] Size: 32.0MB
LUN0 (EFS) [0x240b000 0x1400000] Size: 20.0MB
LUN0 (PARAM) [0x380b000 0xa00000] Size: 10.0MB
LUN0 (MISC) [0x420b000 0x100000] Size: 1.0MB
LUN0 (KEYSTORE) [0x430b000 0x80000] Size: 512.0KB
LUN0 (DEVCFG) [0x438b000 0x20000] Size: 128.0KB
LUN0 (FRP) [0x43ab000 0x80000] Size: 512.0KB
LUN0 (BOTA) [0x442b000 0xc00000] Size: 12.0MB
LUN0 (FOTA) [0x502b000 0x400000] Size: 4.0MB
LUN0 (PERSISTENT) [0x542b000 0x100000] Size: 1.0MB
LUN0 (APNHLOS) [0x552b000 0x5f00000] Size: 95.0MB
LUN0 (MODEM) [0xb42b000 0x5500000] Size: 85.0MB
LUN1 (XBL) [0x6000 0x300000] Size: 3.0MB
LUN2 (XBL) [0x6000 0x300000] Size: 3.0MB
LUN3 (RPM) [0x6000 0x80000] Size: 512.0KB
LUN3 (TZ) [0x86000 0x200000] Size: 2.0MB
LUN3 (HYP) [0x286000 0x80000] Size: 512.0KB
LUN3 (FSG) [0x306000 0x180000] Size: 1.500MB
LUN3 (SEC) [0x486000 0x4000] Size: 16.0KB
LUN3 (PMIC) [0x48a000 0x80000] Size: 512.0KB
LUN3 (DSP) [0x50a000 0x1000000] Size: 16.0MB
LUN3 (DIP) [0x150a000 0x100000] Size: 1.0MB
LUN3 (MDTP) [0x160a000 0x2000000] Size: 32.0MB
LUN3 (ABOOT) [0x360a000 0x200000] Size: 2.0MB
LUN3 (DEVINFO) [0x380a000 0x1000] Size: 4.0KB
LUN3 (BLUETOOTH) [0x380b000 0x100000] Size: 1.0MB
LUN3 (LKSECAPP) [0x390b000 0x60000] Size: 384.0KB
LUN3 (KEYMASTER) [0x396b000 0x40000] Size: 256.0KB
LUN3 (CMNLIB) [0x39ab000 0x40000] Size: 256.0KB
LUN3 (CMNLIB64) [0x39eb000 0x40000] Size: 256.0KB
LUN3 (APDP) [0x3a2b000 0x20000] Size: 128.0KB
LUN3 (MSADP) [0x3a4b000 0x20000] Size: 128.0KB
LUN3 (DPO) [0x3a6b000 0x1000] Size: 4.0KB
LUN3 (DDR) [0x3a6c000 0x100000] Size: 1.0MB
LUN3 (PAD) [0x3b6c000 0x8f000] Size: 572.0KB
i make dump with this size :

UFS_KLUBG4G1CE-B0B1_0_00000000_100000000.bin 4.00 GB (4,294,967,296 bytes)
UFS_KLUBG4G1CE-B0B1_1_00000000_00400000.bin 4.00 MB (4,194,304 bytes)
UFS_KLUBG4G1CE-B0B1_2_00000000_00400000.bin 4.00 MB (4,194,304 bytes)
UFS_KLUBG4G1CE-B0B1_3_00000000_03C00000.bin 60.0 MB (62,914,560 bytes)

and write those dumps to the same UFS chip(KLUBG4G1CE-B0B1) but. after soldering chip on the logic board no boot and detect by cpu with pc
  Reply With Quote
 
Page generated in 0.08416 seconds with 7 queries