GSM-Forum - View Single Post - Galaxy J2 Prime G532G Dead Boot Repair Full Guide

layder · 11-09-2019, 11:38

FW Ver.: 01.63 - old box, 1st generation

you can set lover freq (14Mhz) if you get errors, and use 2,8 IO
also you can add 2 resistors to adapter ~200 Ohm from CMD and D0 to IO (1,8 line) as at pinouts pictures

When you restore boot via BL files and Plus Software, you need De-select Repartition (it needed when eMMC change)

Now after repair boot you need write only GPT from ane worked dump from same device (write by vendor - from file - select only GPT)

11-09-2019, 11:38	#4 (permalink)
layder Product Supporter Join Date: Jun 2002 Location: Belarus Age: 47 Posts: 3,188 Member: 13148 Status: Offline Thanks Meter: 2,948	FW Ver.: 01.63 - old box, 1st generation you can set lover freq (14Mhz) if you get errors, and use 2,8 IO also you can add 2 resistors to adapter ~200 Ohm from CMD and D0 to IO (1,8 line) as at pinouts pictures When you restore boot via BL files and Plus Software, you need De-select Repartition (it needed when eMMC change) Now after repair boot you need write only GPT from ane worked dump from same device (write by vendor - from file - select only GPT)