Quote:
Originally Posted by rashid48581 any one have solution to remove frp of this model ??
Action : Boot Info.
Selected 0-By CPU:MT6739
Exe version: Avengers Box MTK 0.6.1
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM_V1632 (Android) (COM7)
Boot mode: Preloader
Phone detected...Please wait
BBCHIP: 6739 2 cb00
Using Algo 5.
Helio MT6739 phone detected, swithing to helio api
Helio enabled DRAM in First Da: TRUE
Helio connect da error, aborting.
[SECURE BOOT]Not supported by exe or wrongly selected, aborting
If model is listed, please select correct model
If model is not listed, use custom DA from phone firmware
BBCHIP MT6739
Boot Fail.!!!.
[helio]Wait untill phone will start charging.
[0]All done. |
CM2MTK2
SELECT :WIKO SEC_6739
RESET FRP DONE
Here is Log
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek PreLoader USB VCOM (Android) (COM23)
MODE : PRELOADER PORT
PORT : 23
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0002
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000001
BROM : SecMode : SBC
BROM : PRELOADER PORT
MODE : Wiko : SEC_6739 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : DA_PL.bin
AGENT : Found MT6739
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info
SRAM: 0x00040000 [ 256.00 KB ]
DRAM: 0x40000000 [ 1.00 GB ]
EMMC: 880103455042313030497746865985B9
EMMC: VEN : FORESEE | OEM : 301 | DEV : EPB100
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x1CE100000 [ 7.22 GB ]
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000
RNID : E2BA017329E3DF6B9D948CF5E05F0C66
DA : USB : HIGH-SPEED
Boot done!
Format Ok : RESET PROTECTION
Done!
Elapsed: 00:00:24
Reconnect Power/Cable!