Pattern cleaning + google account cleaning + 100% CM2SP2 software copy Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.02
Load IDBase v10107 Ok!
Operation : Identify [ v2.02 ]
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
ERROR : Protocol HandShake failed!
Error : Fail to init protocol!
Remove battery, cable. Check cable and connection. Repeat operation!
Reconnect Power/Cable!
Operation : Identify [ v2.02 ]
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_1GB_RS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!
Boot Done!
Device info :
Patch Level : OPM2.171019.012
Display ID : I940B_IPRO_CO_V02_20190115
Ver. CodeName : REL
Ver. Release : 8.1.0
Sec. Patch : 2019-01-05
Build Time : 1547541136
Product Model : Opal 4S
Product Brand : IPRO
Product Name : Opal4S
Product Device : Opal4S
Product Manfct : IPRO
Product Info : te4b_zk940b
Product Board : Opal4S
Board Platform : sp7731e
Update DataBase ...
Platform Version: MOCORTM_17C_W18.23.4_P12_Debug
Project Version: pike2_pub
BASE Version: FM_BASE_17C_W18.23.4_P12
HW Version: sc7731e_modem
CMP_Time : 11-12-2018 20:40:47
MODEM TAG : MOCORTM_17C_W18.23.4_P12_Debug_FM_BASE_17C_W18.23. 4_P12_sc7731e_modem_pike2_pub
UserData : STATE : PLAIN
Done!
Elapsed: 00:02:38
Operation : Read PrivacyLock [ v2.02 ]
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_1GB_RS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!
Boot Done!
PLLock : NOT found or NOT set!
Reconnect Power/Cable!
Done!
Elapsed: 00:01:10
Operation : Read FW [ v2.02 ]
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_1GB_RS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!
Boot Done!
Device info :
Patch Level : OPM2.171019.012
Display ID : I940B_IPRO_CO_V02_20190115
Ver. CodeName : REL
Ver. Release : 8.1.0
Sec. Patch : 2019-01-05
Build Time : 1547541136
Product Model : Opal 4S
Product Brand : IPRO
Product Name : Opal4S
Product Device : Opal4S
Product Manfct : IPRO
Product Info : te4b_zk940b
Product Board : Opal4S
Board Platform : sp7731e
VlnrLevel : 0x00
SP7731E__IPRO__Opal_4S__8.1.0__I940B_IPRO_CO_V02_2 0190115__OPM2.171019.012__te4b_zk940b
Read : prodnv.img
ExtSparse : Compression ratio : 50%
Read : phase.cfg
Read : recovery.img
Read : tos.bin
Read : sml.bin
Read : u-boot.bin
Read : boot_logo.bmp
Read : fastboot_logo.bmp
Read : nvitem_w.bin
Make : persist.img
Read : gnssmodem.bin
Read : gnssbdmodem.bin
Read : modem_wcn.img
Read : modem_w.bin
Read : deltanv_w.bin
Read : gdsp_w.bin
Read : pm_sys.bin
Read : boot.img
Read : system.img
ExtSparse : Compression ratio : 76%
Make : cache.img
Read : vendor.img
ExtSparse : Compression ratio : 49%
Read : vbmeta.img
Make : userdata.img
Read : u-boot-spl.bin
Firmware size : 0x50E596A4 ( 1,26 GiB )
Android Info saved : _Android_info.txt
Reconnect Power/Cable!
Done!
Elapsed: 00:35:35
Operation : Format FS / Reset Settings [ v2.02 ]
Mode : Default [ Reset Settings + FRP ]
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_1GB_RS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!
Boot Done!
Wipe Ok : UserData
Wipe Ok : Cache
Wipe Ok : FRP
Reconnect Power/Cable!
Done!
Elapsed: 00:01:15 |