 Qmobile i6 Metal One V2 FullFlash Done
Operation : Flash Firmware [ v2.02 ]
Setting : Update NVRAM : False
Setting : Force NVRAM : False
Setting : Update PMT : False
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : PAC : I6_METAL_ONE_i6_Metal_ONE_new_6.0_MRA58K_release-keys_QMobile_i6_Metal_ONE V4.0_14_12.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
ProtoEx : : TRCC not supported!
FDL : Control transfered!
Boot Done!
CODE : prodnv.img
ERASE : UBOOT
ERASE : WRUNTIMENV1
ERASE : WCNRUNTIMENV1
ERASE : MISC
UBOOT : u-boot-spl-16k.bin
CODE : sc7731C_CP0_modem.bin
CODE : DSP_DM_Gx.bin
CODE : sc8830g_modem_CP2_WCN_Trunk_W16.28.5_Release.bin
CODE : logo_480x854.bin
CODE : fblogo_480x854.bin
CODE : boot.img
FSIMG : system.img
CODE : sysinfo.img
FSIMG : cache.img
CODE : recovery.img
FSIMG : userdata.img
UBOOT : u-boot.bin
Flashing finished!
Reconnect Power/Cable!
Done!
Elapsed: 00:09:31 |