Welcome to Octoplus Box Samsung software version 2.8.4
-----------------------------------------------------------------------------------
To connect SM-G355M phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3. Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM20
Selected model: SM-G355M
Operation: Read info
Reading info, please wait...
Can't kill external ADB references. Please, close all programs that use ADB server.
Please, press "OK" button on the phone to allow USB debugging.
Detected phone model: SM-G355M
Firmware compiled date: Tue Sep 29 03:47:35 KST 2015
PDA version: G355MUBU0AOI4
CSC version: G355MUUB0AOI1
SW version: G355MUBU0AOI2
Build number:
Phone IMEI:
Phone SN: R21F702FY9M
Android version: 4.4.2 (KOT49H)
Sales code: TPA
Country: PANAMA
HW platform: sc8830
HW Chip: sc7735s
HW Modem: sc7735s
SIM 1 status: ready
Codename: kanas3gub
Performed by 2.8.4 Software version.
Selected firmware file: G355MUBU0ANF1_G355MUUB0ANF1_TPA_Android_4.4.2.oct
Please put the phone into Download Mode and connect USB cable.
To put SM-G355M into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Advanced mode!
Firmware write started.
Writing KERNEL section...
KERNEL section has been written successfully.
Writing CSC section...
CSC section has been written successfully.
Writing HIDDEN section...
HIDDEN section has been written successfully.
Writing FIXNV2 section...
FIXNV2 section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing MODEM section...
MODEM section has been written successfully.
Writing WDSP section...
WDSP section has been written successfully.
Writing system section...
system section has been written successfully.
Firmware writing successfully completed.
Performed by 2.8.4 Software version.