qmobile l9 format and reed flash don
Code:
Card found : CE90936C , v0138
Infinity-Box Chinese Miracle II : SC/RDA Module [SCR] v1.05
SCRD mode : AUTO
SPRD mode : SC6530 : REV : 0000 : NOR : [ 4MB-8MB ]
SPRD mode : SC6531 : REV : C000 : NOR : [ 4MB-8MB ]
Operation : Format FileSystem [ v1.05 ]
1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!
Wait for device ...
Device not found!
Remove battery, cable. Check cable and connection. Repeat operation!
Reconnect Power/Cable!
Operation : Reset Settings [ v1.05 ]
----- > Powered On :
1. Power On device
2. Connect USB cable
3. When device show StorageMode : Press '0' button for a 5 second!
----- > Powered Off :
1. Insert USB cable
2. Wait when device show Charge icon
3. When device show StorageMode : Press '0' button for a 5 second!
Wait for device ...
Device Connected!
BOOT_PWR0 : 0x00200000
BOOT_INIT : 0x8F1CE7E6
BOOT_MODE : BOOTROM
Boot_CPU : 0x08090007 : [SPREADTRUM] : SC6533G
MEMD for flsh_spi32m Branch: none
Boot_CS0 : 0x00000000 : SPI : [SPIDEF] : 25Q32 : 0x00400000 [ 4MiB ]
Performing MemoryInit
Selecting RL
Sending RL
Config : MemoryInit
Config : Loader
BOOT_MODE : RLOADER
Boot IV : 0xFBA2A250
Boot done!
Preparing PMT
Verifying PMT
Erasing 1474560 bytes
FileSystem format done!
Done!
Elapsed: 00:00:23
Reconnect Power/Cable!
Operation : Read Flash [ v1.05 ]
----- > Powered On :
1. Power On device
2. Connect USB cable
3. When device show StorageMode : Press '0' button for a 5 second!
----- > Powered Off :
1. Insert USB cable
2. Wait when device show Charge icon
3. When device show StorageMode : Press '0' button for a 5 second!
Wait for device ...
Device Connected!
BOOT_PWR0 : 0x00200000
BOOT_INIT : 0x8F18E7E6
BOOT_MODE : BOOTROM
Boot_CPU : 0x08090007 : [SPREADTRUM] : SC6533G
MEMD for flsh_spi32m Branch: none
Boot_CS0 : 0x00000000 : SPI : [SPIDEF] : 25Q32 : 0x00400000 [ 4MiB ]
Performing MemoryInit
Selecting RL
Sending RL
Config : MemoryInit
Config : Loader
BOOT_MODE : RLOADER
Boot IV : 0xFBA2A250
Boot done!
Read done, 0x00400000
Verify FlashContent
MCU verified
CAL verified
FAC verified
Device Info Details :
[0] : S069_YXSD_C1810_QMobile_L103_F3_QQVGA
[1] : 8809
[2] : 8809e2
[3] : CT8851C
[4] : pasw_rda6625
[5] : flsh_spi32m
[6] : gc9105/gc9102/st7735s/nv3021/gc9106
[7] : gc6133/gc6123/bf3a01serial
[8] : rdabt_8809
[9] : rdafm_8809e
[10] : release
[11] : 2018-01-22_15:17:01
[12] : Qmobile_V16_20180122
Saved to : H:\QMOBILE\QMOBILE\L-SERIES\L9 RDA\
Saved as : SC6533G_4MiB_S069_YXSD_C1810_QMobile_L103_F3_QQVGA_Qmobile_V16_20180122_2018-01-22_151701.ilod
Done!
Elapsed: 00:01:26
Reconnect Power/Cable!
Best Regards =========================
MR,
Niaz muhammad
Always Follow The Forum RULES
Use Only Thanks Button