| Qmobile Phantom P1 (SP 9863A) Read Firmware Done
Qmobile Phantom P1 (SP 9863A) Read Done
Operation : Read FW [ v2.03 ]
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC9863x_BASE : SC9863_eMMC_2GB_RS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!
Boot Done!
Device info :
Patch Level : OPM2.171019.012
Display ID : QMobile_Phantom P1_MP_20190124
Ver. CodeName : REL
Ver. Release : 8.1.0
Sec. Patch : 2018-11-05
Build Time : 1548327047
Product Model : Qmobile Phantom P1
Product Brand : Qmobile
Product Name : Phantom_P1
Product Device : Phantom_P1
Product Manfct : Qmobile
Product Info : Phantom_P1
Product Board : sp9863a_3h10
Board Platform : sp9863a
VlnrLevel : 0x02
SP9863A__Qmobile__Qmobile_Phantom_P1__8.1.0__QMobi le_Phantom_P1_MP_20190124__OPM2.171019.012__Phanto m_P1
Read : u-boot.bin
Read : sml.bin
Read : tos.bin
Read : vbmeta.img
Read : ldsp_l.bin
Read : gdsp_l.bin
Read : modem_l.bin
Read : nvitem_l.bin
Read : modem_wcn.img
Read : gnssmodem.bin
Read : gnssbdmodem.bin
Read : pm_sys.bin
Read : deltanv_l.bin
Read : boot.img
Read : recovery.img
Make : persist.img
Read : boot_logo.bmp
Read : fastboot_logo.bmp
Read : system.img
ExtSparse : Compression ratio : 69%
Read : vendor.img
ExtSparse : Compression ratio : 85%
Make : userdata.img
Make : cache.img
Read : prodnv.img
ExtSparse : Compression ratio : 43%
Read : phase.cfg
Read : u-boot-spl.bin
Firmware size : 0xB3186460 ( 2.80 GiB )
Android Info saved : _Android_info.txt
Reconnect Power/Cable!
|