GSM-Forum - View Single Post - VOG-L29 error flashing

ozoozo · 01-07-2020, 17:05

try dload

firmware link sent to you check your inbox

Instructions

This is the requirements

1- Upgrade with USB-OTG

An OTG cable
A USB drive (8GB at least) Formatted as NTFS or ExFat
Also you can use an USB drive + USB C adapter

Open the Zip and extract the dload folder on the pendrive
- Turn off the P30 Pro
- Connect the pendrive with the OTG cable
- Now press the three buttons at the same time.
- Volume +
- Volume -
- Power button.

(The p30pro will light up and vibrate, keep the buttons pressed)
Only when you see the blank screen and EMUI appears will you release the buttons.
The flashing will start and lasts about 2 minutes.
After flashing the P30 Pro will restart automatically

01-07-2020, 17:05	#4 (permalink)
ozoozo Junior Member Join Date: Dec 2015 Posts: 13 Member: 2500590 Status: Offline Thanks Meter: 1	try dload firmware link sent to you check your inbox Instructions This is the requirements 1- Upgrade with USB-OTG An OTG cable A USB drive (8GB at least) Formatted as NTFS or ExFat Also you can use an USB drive + USB C adapter Open the Zip and extract the dload folder on the pendrive - Turn off the P30 Pro - Connect the pendrive with the OTG cable - Now press the three buttons at the same time. - Volume + - Volume - - Power button. (The p30pro will light up and vibrate, keep the buttons pressed) Only when you see the blank screen and EMUI appears will you release the buttons. The flashing will start and lasts about 2 minutes. After flashing the P30 Pro will restart automatically Last edited by ozoozo; 01-07-2020 at 17:11.