View Single Post
Old 01-10-2020, 04:39   #991 (permalink)
kothamamun
No Life Poster
 
kothamamun's Avatar
 
Join Date: Apr 2016
Location: Liton,KALAROA,SATKHIRA
Posts: 2,249
Member: 2556542
Status: Offline
Thanks Meter: 970
Nokia rm-1034 hang on logo done by flashing

Code:
Operation : Write FirmWare [ v1.19 ]
Setting   : UserData erase : False
Setting   : LangPack Only : False

1. Make sure device is powered off. Power off, if need. Wait 10 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek DA USB VCOM Port (COM39)
MODE : NOKIA USB SERIAL
PORT : 39
BROM : Init BROM
BROM init passed!
     CHIP : MT6261 , SBID : 0xCB01 , HWVR : 0x8000 , SWVR : 0x0001
BROM : SECCFG : 0x00000007
BROM : NOKIA USB SERIAL
BROM : 0x05 BL : 0x00
BROM : MEID : 6D85F20D97C897FD149CE30F505A81F7
BROM : Run BootLoader ... 
BOOT : Run BL ver. 01
BOOT : 0x05 BL : 0x01
BOOT : WD : 0005
BOOT : RTC : Setup ... 
BOOT : RTC : 000E
BOOT : PRJ : N103.30.04.11.p1
BOOT : SWR : 30.04.11
AGENT : Look for suitable BootChain in DA ... 
AGENT : DEFAULT AUTO
AGENT : Found MT6261
AGENT : N103.30.04.11.p1
     BOOT : Sending 1st DA ...
BOOT : DA sent
BOOT : Transfer control to DA ... 
DA : Sync Passed!
DA : Authentification pass!
DA : Agent : v03.02 on BBID : 0x8E

        NOR: 00C8 : 0060 : 0016 : 0000
        NOR: [GigaDevice] GD25LQ32
        NOR: 
              TSIZE  : 0x00400000 [ 4.00 MB ]
              PSIZE  : 0x00400000 [ 4.00 MB ]
              STYPE  : 0x00000000
              FLOTP  : DA_NOR_OTP_EXIST

 STATUS : OK
 BSTYLE : SF_FLASH_BOOT

Boot done!

VPL SoftwareVersion   : 10.02.11 [TA-1034]
DEV SoftwareVersion   : 30.04.11
SWInfo compare result : VPL SW ( Major version ) is LOWER, than in DEVICE!

Load FlashSet : 
MROM : TA-1034_ROM_eMP_10.02.11
LANG : TA-1034_LANG_PACK_ROM_MS_eMP_10.02.11_001
CUST : TA-1034_CUSTPACK_ROM_MS_eMP_10.02.11_001
JUMP : TA-1034_JUMP_TABLE_MS_eMP_10.02.11_001
VIVA : TA-1034_VIVA_eMP_10.02.11

Prepare FlashSet : 
DCR : TA-1034_ROM_eMP_10.02.11
DCR : TA-1034_LANG_PACK_ROM_MS_eMP_10.02.11_001
DCR : TA-1034_CUSTPACK_ROM_MS_eMP_10.02.11_001
DCR : TA-1034_JUMP_TABLE_MS_eMP_10.02.11_001
DCR : TA-1034_VIVA_eMP_10.02.11

Prepare Target 
SDS : OK : 0x003F8000 : 0x00008000

Erase Target Flash 
Erase done!

Write Target Flash
Write : TA-1034_ROM_eMP_10.02.11
Write : TA-1034_LANG_PACK_ROM_MS_eMP_10.02.11_001
Write : TA-1034_CUSTPACK_ROM_MS_eMP_10.02.11_001
Write : TA-1034_JUMP_TABLE_MS_eMP_10.02.11_001
Write : TA-1034_VIVA_eMP_10.02.11
Write done, waiting target response ... 
Write flash done!

Verify Target FlashContent
Verify : TA-1034_ROM_eMP_10.02.11
Verify : TA-1034_LANG_PACK_ROM_MS_eMP_10.02.11_001
Verify : TA-1034_CUSTPACK_ROM_MS_eMP_10.02.11_001
Verify : TA-1034_JUMP_TABLE_MS_eMP_10.02.11_001
Verify : TA-1034_VIVA_eMP_10.02.11

Done!
Elapsed: 00:01:18

Reconnect Power/Cable!
  Reply With Quote
The Following User Says Thank You to kothamamun For This Useful Post:
 
Page generated in 0.14130 seconds with 6 queries