View Single Post
Old 01-14-2020, 10:35   #997 (permalink)
kothamamun
No Life Poster
 
kothamamun's Avatar
 
Join Date: Apr 2016
Location: Liton,KALAROA,SATKHIRA
Posts: 2,249
Member: 2556542
Status: Offline
Thanks Meter: 970
Nokia ta-1139 identify,password remove and firmware backup done

Code:
Operation : Identify [ v1.20 ]

1. Make sure device is powered off. Power off, if need. Wait 10 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek DA USB VCOM Port (COM39)
MODE : NOKIA USB SERIAL
PORT : 39
BROM : Init BROM
BROM init passed!
     CHIP : MT6260 , SBID : 0xCB00 , HWVR : 0x8000 , SWVR : 0x0000
BROM : SECCFG : 0x00000005
BROM : NOKIA USB SERIAL
BROM : 0x05 BL : 0x00
BROM : MEID : 0D2C69BB3CE3E5DD4BB2E261A06A6840
BROM : Run BootLoader ... 
BOOT : Run BL ver. 01
BOOT : 0x05 BL : 0x01
BOOT : WD : 0005
BOOT : RTC : Setup ... 
BOOT : RTC : 000E
BOOT : PRJ : OUTRUN.10.01.11.p1
BOOT : SWR : 10.01.11
BOOT : BDDS : 30
BOOT : PSRM : Init
BOOT : PSRM : 0003

Boot done!

SWVer : OUTRUN.10.01.11.p1
FLASH : 00EF : 0060 : 0018 : 0000
PRDC : 059Z0X8
IMEI[1] : 357704109543435
IMEI[2] : 357704109983433
NCK  : 20 digits
PROV : 24407000

Saved as  : 357704109543435.mtsec
Saved to  : C:\InfinityBox\BEST2\Backup\


Done!
Elapsed: 00:00:28

Reconnect Power/Cable!
Code:
Operation : Reset Settings [ v1.20 ]

1. Make sure device is powered off. Power off, if need. Wait 10 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek DA USB VCOM Port (COM39)
MODE : NOKIA USB SERIAL
PORT : 39
BROM : Init BROM
BROM init passed!
     CHIP : MT6260 , SBID : 0xCB00 , HWVR : 0x8000 , SWVR : 0x0000
BROM : SECCFG : 0x00000005
BROM : NOKIA USB SERIAL
BROM : 0x05 BL : 0x00
BROM : MEID : 0D2C69BB3CE3E5DD4BB2E261A06A6840
BROM : Run BootLoader ... 
BOOT : Run BL ver. 01
BOOT : 0x05 BL : 0x01
BOOT : WD : 0005
BOOT : RTC : Setup ... 
BOOT : RTC : 000E
BOOT : PRJ : OUTRUN.10.01.11.p1
BOOT : SWR : 10.01.11
AGENT : Look for suitable BootChain in DA ... 
AGENT : DEFAULT AUTO
AGENT : Found MT6260
AGENT : OUTRUN.10.01.11.p1
     BOOT : Sending 1st DA ...
BOOT : DA sent
BOOT : Transfer control to DA ... 
DA : Sync Passed!
DA : Authentification pass!
DA : Agent : v03.02 on BBID : 0x8B

        NOR: 00C8 : 0060 : 0018 : 0000
        NOR: [GigaDevice] GD25LQ128
        NOR: 
              TSIZE  : 0x01000000 [ 16.00 MB ]
              PSIZE  : 0x01000000 [ 16.00 MB ]
              STYPE  : 0x00000000
              FLOTP  : DA_NOR_OTP_NOT_SUPPORT

 STATUS : OK
 BSTYLE : SF_FLASH_BOOT

Boot done!

FFS Info exists in MAUI : 0x00C40000  :  0x003B4000
FFS Format ... 
FFS Format Ok!

Done!
Elapsed: 00:00:32

Reconnect Power/Cable!
Code:
Operation : Read FirmWare [ v1.20 ]

1. Make sure device is powered off. Power off, if need. Wait 10 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek DA USB VCOM Port (COM39)
MODE : NOKIA USB SERIAL
PORT : 39
BROM : Init BROM
BROM init passed!
     CHIP : MT6260 , SBID : 0xCB00 , HWVR : 0x8000 , SWVR : 0x0000
BROM : SECCFG : 0x00000005
BROM : NOKIA USB SERIAL
BROM : 0x05 BL : 0x00
BROM : MEID : 0D2C69BB3CE3E5DD4BB2E261A06A6840
BROM : Run BootLoader ... 
BOOT : Run BL ver. 01
BOOT : 0x05 BL : 0x01
BOOT : WD : 0005
BOOT : RTC : Setup ... 
BOOT : RTC : 000E
BOOT : PRJ : OUTRUN.10.01.11.p1
BOOT : SWR : 10.01.11
BOOT : BDDS : 30
BOOT : PSRM : Init
BOOT : PSRM : 0003

Boot done!

SWVer : OUTRUN.10.01.11.p1
FLASH : 00EF : 0060 : 0018 : 0000
CODE  : 0x00C40000
Reading Flash ... 
TDSN : TA-1139
PRDC : 059Z0X8
PPM  : MD
LANG : 
[1] : Malay (Malaysia)
[2] : Indonesian (Indonesia)
[3] : Chinese (S)
[4] : English (United Kingdom)

BUILD : TA-1139_ROM_eMP_10.01.11
BUILD : TA-1139_LANG_PACK_ROM_MD_eMP_10.01.11_001
BUILD : TA-1139_CUSTPACK_ROM_MD_eMP_10.01.11_001
BUILD : TA-1139_JUMP_TABLE_MD_eMP_10.01.11_001
BUILD : TA-1139_VIVA_eMP_10.01.11

Make VPL definition

Save Path : D:\Nokia Flash file\TA-1139\
Save Name : TA-1139_059Z0X8_10.01.11.vpl

Build Finished!

Done!
Elapsed: 00:05:58

Reconnect Power/Cable!
  Reply With Quote
The Following User Says Thank You to kothamamun For This Useful Post:
 
Page generated in 0.15229 seconds with 6 queries