Code:
SPRD mode : SC6531 : REV : E000 : NOR : [ 4MB ]
Operation : Identify [ v1.05 ]
1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Infinity SCR SC6531E Loader v 1.2
Port speed : 921600
FDL Flash : Control transfered!
Boot Done!
CS0_MEM : SPI : [WINBOND] : W25Q32 : 0x00400000 [ 4MiB ]
IMEI[1] : 35282XXXXXXXXXX
IMEI[2] : 35282XXXXXXXXXX
Done!
Elapsed: 00:00:30
Reconnect Power/Cable!
Operation : Read Flash [ v1.05 ]
1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Infinity SCR SC6531E Loader v 1.2
Port speed : 921600
FDL Flash : Control transfered!
Boot Done!
CS0_MEM : SPI : [WINBOND] : W25Q32 : 0x00400000 [ 4MiB ]
Read Flash Ok, Size : 4,00 MiB
Platform Version: MOCOR_16A.W17.09.3_Debug
G185C_it2150_32X32_128X160BAR_EnFrPoArSwHa
Project Version: it2150-G185C-EnFrPoArSwHa-20170925
MMI Version: it2150-G185C-EnFrPoArSwHa-20170925
BASE Version: BASE_SVN
HW Version: sc6531efm_bar
09-25-2017 18:54:44
LOG Version: V1.0.1
Saved to : C:\Users\MTK\Documents\DUMP CM2\MOCOR_16A.W17.09.3_Debug
G185C_it2150_32X32_128X160BAR_EnFrPoArSwHa.bin
Done!
Elapsed: 00:01:39
Reconnect Power/Cable!
Operation : Format FileSystem [ v1.05 ]
1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Infinity SCR SC6531E Loader v 1.2
Port speed : 921600
FDL Flash : Control transfered!
Boot Done!
CS0_MEM : SPI : [WINBOND] : W25Q32 : 0x00400000 [ 4MiB ]
Make backup of sensetive data
Backup saved to : C:\InfinityBox\CM2SCR\Backup\00400000_FMT_BACK_0F95156D8DA0_NVM.nv
Executing FormatFFS ...
Format FFS Done!
Done!