Code:
SPRD mode : SC6531 : REV : 0000 : NOR : [ 8MB-16MB]
Operation : Identify [ v1.05 ]
1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Infinity SCR 653x NOR v1.3(c)2019
Port speed : 921600
FDL Flash : Control transfered!
Boot Done!
CS0_MEM : SPI : [FIDELIX] : FM25Q64 : 0x00800000 [ 8MiB ]
IMEI[1] : 35514XXXXXXXXXX
IMEI[2] : 35514XXXXXXXXXX
Done!
Elapsed: 00:00:33
Reconnect Power/Cable!
Operation : Read Flash [ v1.05 ]
1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Infinity SCR 653x NOR v1.3(c)2019
Port speed : 921600
FDL Flash : Control transfered!
Boot Done!
CS0_MEM : SPI : [FIDELIX] : FM25Q64 : 0x00800000 [ 8MiB ]
Read Flash Ok, Size : 8,00 MiB
Platform Version: MOCOR_12C.W13.04.14_Debug
G2425_it5615_64X64_240X320BAR_EnFrPoArSwHa
Project Version: it5615-G2425-EnFrPoArSwHa-20181225
MMI Version: it5615-G2425-EnFrPoArSwHa-20181225
BASE Version: BASE_SVN
HW Version: fp6531_bar
12-25-2018 17:59:45
LOG Version: V1.0.1
Saved to : C:\Users\MTK\Documents\DUMP CM2\MOCOR_12C.W13.04.14_Debug
G2425_it5615_64X64_240X320BAR_EnFrPoArSwHa.bin
Done!
Elapsed: 00:02:11
Reconnect Power/Cable!
Operation : Format FileSystem [ v1.05 ]
1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Infinity SCR 653x NOR v1.3(c)2019
Port speed : 921600
FDL Flash : Control transfered!
Boot Done!
CS0_MEM : SPI : [FIDELIX] : FM25Q64 : 0x00800000 [ 8MiB ]
Make backup of sensetive data
Backup saved to : C:\InfinityBox\CM2SCR\Backup\00800000_FMT_BACK_0694FC5CA060_NVM.nv
Executing FormatFFS ...
Format FFS Done!
Done!
Elapsed: 00:00:54