| lg g6 us700 20a frp bypass done by octopus (via testpoint)
Checking data...OK
Platform: LG Qualcomm
Selected port: COM109
Selected model: M700
Reading info...
Model ID: LG-US700
IMEI: 359994-08-026192-9
Android version: 8.1.0
Battery level: 40%
Mode: Emergency
Initializing flash...OK
Platform: msm8937
SW version: LGUS700AT-00-V20a-NAO-XX-JUL-23-2018-ARB00+0
Android version: 8.1.0
LAF Version: 1.1
Product ID: CH32S181105000204
IMEI: 359994-08-026192-9
Target operator: LAO
Hardware: rev_10
Selecting output file...OK
Destination file: "M700_359994080261929_03-02-2020_12-40-29.bin"
Reading partitions...OK
Reading full flash...OK
Performed by 2.9.7.01 Software version.
Please, select Reset FRP Method!
To perform Reset FRP operation do the next:
1. Attach testpoint as shown on Figure in manual, and connect phone with Micro USB cable.
2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008".
3. Release testpoint.
Performed by 2.9.7.01 Software version.
Please, select Reset FRP Method!
To perform Reset FRP operation do the next:
1. Attach testpoint as shown on Figure in manual, and connect phone with Micro USB cable.
2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008".
3. Release testpoint.
Found port COM3
Connecting...OK
Sending loader...OK
Reconnecting phone...OK
Checking request...
Request has been successfully sent!
Obtaining response...OK
Reading partitions...OK
Searching signatures...
Step 1...
Step 2...
Step 3...
Resetting FRP Lock...OK
Resetting FRP lock successfully completed!
Rebooting phone...
Performed by 2.9.7.01 Software version. |