View Single Post
Old 02-08-2020, 23:53   #2 (permalink)
hitech care
No Life Poster
 
hitech care's Avatar
 
Join Date: Nov 2012
Location: Ek India Happy Wala.. :-)
Posts: 2,828
Member: 1834832
Status: Offline
Thanks Meter: 1,450
Quote:
Originally Posted by allttar View Post
After repairing BOOT

After repairing the Pooh
Still not accepting update due to write protection enable??


00: GPT (00000000, 00002000) 4 MB
P01: apnhlos (00002000, 000063C8) 12.47 MB
P02: mdm (000083C8, 00019C38) 51.53 MB
P03: sbl1 (00022000, 00000100) 128 KB
P04: sbl2 (00022100, 00000200) 256 KB
P05: sbl3 (00022300, 00000400) 512 KB
P06: aboot (00022700, 00001000) 2048 KB
P07: rpm (00023700, 00000400) 512 KB
P08: tz (00023B00, 00000400) 512 KB
P09: pad (00023F00, 00008400) 16.5 MB
P10: efs (0002C300, 00006D00) 13.62 MB
P11: modemst1 (00033000, 00001800) 3072 KB
P12: modemst2 (00034800, 00001800) 3072 KB
P13: m9kefs1 (00036000, 00000618) 780 KB
P14: m9kefs2 (00036618, 00000618) 780 KB
P15: m9kefs3 (00036C30, 00000618) 780 KB
P16: system (00037248, 00564000) 2760 MB
P17: persist (0059B248, 00004000) 8 MB
P18: cache (0059F248, 0040B000) 2070 MB
P19: param (009AA248, 00003000) 6 MB
P20: boot (009AD248, 00005000) 10 MB
P21: recovery (009B2248, 00005000) 10 MB
P22: fota (009B7248, 00005000) 10 MB
P23: backup (009BC248, 00003000) 6 MB
P24: fsg (009BF248, 00001800) 3072 KB
P25: ssd (009C0A48, 00000010) 8 KB
P26: persdata (009C0A58, 00004800) 9 MB
P27: hidden (009C5258, 000FA000) 500 MB
P28: carrier (00ABF258, 0000A000) 20 MB
P29: userdata (00AC9258, 0128EDA8) 9.279 GB
Backuping efs partition...
Opening C:/Program Files/Medusa Pro Software/Backups/016G94_efs_0x2c300_0x6d00_08_02_2020_10_10_16.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:05
SW: 2.0.4; FW: 1.24.
Backuping modemst1 partition...
Opening C:/Program Files/Medusa Pro Software/Backups/016G94_modemst1_0x33000_0x1800_08_02_2020_10_10_16 .bin file...
Reading. Please wait... Done.
Elapsed time 00:00:01
SW: 2.0.4; FW: 1.24.
Backuping modemst2 partition...
Opening C:/Program Files/Medusa Pro Software/Backups/016G94_modemst2_0x34800_0x1800_08_02_2020_10_10_16 .bin file...
Reading. Please wait... Done.
Elapsed time 00:00:01
SW: 2.0.4; FW: 1.24.
Backuping fsg partition...
Opening C:/Program Files/Medusa Pro Software/Backups/016G94_fsg_0x9bf248_0x1800_08_02_2020_10_10_16.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:01
SW: 2.0.4; FW: 1.24.

Selected pit file: C:/Users/gsm/Downloads/Compressed/I9505XXUHOA7_OXAHOA7/JFLTE_EUR_OPEN.pit

Open file "C:/Users/gsm/Downloads/KSA-I9505XXUEMK9-20131203--www.samsony.net--/I9505XXUEMK9_I9505OJVEMK4_I9505XXUEMK9_HOME.tar.md 5".


Writing MBR...Done.
Writing primary GPT...Done.
Writing secondary GPT...Done.
Writing PIT
Write data verification is enabled.
Writing. Please wait...
Writing partition APNHLOS... from 2000 to 486E Done.
Writing partition MDM... from 83C8 to 18F0E Done.
Writing partition SBL1... from 22000 to BA Done.
Writing partition SBL2... from 22100 to 12A Done.
Writing partition SBL3... from 22300 to 211 Done.
Writing partition ABOOT... from 22700 to 9AD Done.
Writing partition RPM... from 23700 to 12D Done.
Writing partition TZ... from 23B00 to 19E Done.
Writing partition SYSTEM... from 37248 to 429689 Done.
Writing partition CACHE... from 59F248 to 49501 Done.
Writing partition BOOT... from 9AD248 to 3F71 Done.
Writing partition RECOVERY... from 9B2248 to 4AA9 Done.
Writing partition HIDDEN... from 9C5258 to AC9A Done.
Writing is finished.
SW: 2.0.4; FW: 1.24.

If Write Protection On Better Disable It Using Medusa Pro...If Still Same Issue Try Firmware Update Or Replace Chip...
 
The Following User Says Thank You to hitech care For This Useful Post:
 
Page generated in 0.09391 seconds with 8 queries