[yosbel182us]

For What Logs if Infinity not have this loaders bro??
Try with diferents loaders
Here with SP2

Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.03

Load IDBase v10107 Ok!


Operation : Identify [ v2.03 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
ERROR : Protocol HandShake failed!

Error : Fail to init protocol!
Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Identify [ v2.03 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_1GB_RS
Sending Init Boot ...
Boot sent!
Kick FDL ...
ERROR : FDL NOT started!

Error : Fail to boot FDL!
Unsupported device with selected fdl! Change settings!

Reconnect Power/Cable!

Operation : Identify [ v2.03 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731x_BASE : SC7731GEA_eMMC_1GB_NS
Sending Init Boot ...
Boot sent!
Kick FDL ...
ERROR : FDL NOT started!

Error : Fail to boot FDL!
Unsupported device with selected fdl! Change settings!

Reconnect Power/Cable!

Operation : Identify [ v2.03 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_512MB_SS
Sending Init Boot ...
Boot sent!
Kick FDL ...
ERROR : FDL NOT started!

Error : Fail to boot FDL!
Unsupported device with selected fdl! Change settings!

Reconnect Power/Cable!

Operation : Identify [ v2.03 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...


Device not found!
Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Card found : 997D19B7 , v0138
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.03

Load IDBase v10107 Ok!


Operation : Identify [ v2.03 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_512MB_RS
Sending Init Boot ...
Boot sent!
Kick FDL ...
ERROR : FDL NOT started!

Error : Fail to boot FDL!
Unsupported device with selected fdl! Change settings!

Reconnect Power/Cable!

Card found : 997D19B7 , v0138
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.03

Load IDBase v10107 Ok!

Here with InfinitySPD

Chinese Miracle II [SPD module] v 1.27

Set mode to : SP [SC773x] eMMC [Android 6.x]

========================= Start =========================
11/02/2020 / 15:03:26
================================================== =======
Card found: S/N : 997D19B7 , v0138
Chinese Miracle II [SPD module] v 1.27

Set mode to : SP [SC773x] eMMC [Android 6.x]

Set mode to : SP [SC773x] eMMC [Android 5.x]

Set mode to : SP [SC773x] eMMC [Generic 4.x-5.0]

Set mode to : SPD6530_SAMSUNG

Set mode to : SP [SC773x] eMMC [Android 6.x]

Set mode to : [AltLDR] SP [SC773x] eMMC [Android 6.x]

========================= Start =========================
14/02/2020 / 9:55:27
================================================== =======
Card found: S/N : 997D19B7 , v0138
Chinese Miracle II [SPD module] v 1.27

Set mode to : SP SC77xx [Model Select]

Set mode to : SP [SC773x] eMMC [Android 5.x]

Start at : [14/02/2020 / 9:56:17]
Operation : Check/Read Info [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
-> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable

==== Wait for phone...

Phone found! [ 87 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
Boot failed!
DS : Loader start failed! Wrong Model selection!
Boot failed!

Reconnect Power/Cable!

Finish at : [14/02/2020 / 9:56:45]

========================= Start =========================
14/02/2020 / 10:55:50
================================================== =======
Card found: S/N : 997D19B7 , v0138
Chinese Miracle II [SPD module] v 1.27

Set mode to : SP [SC8830] eMMC [Generic]

Start at : [14/02/2020 / 10:57:32]
Operation : Check/Read Info [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
-> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable

==== Wait for phone...

Phone found! [ 87 ]
Open Port Failed!

Reconnect Power/Cable!

Finish at : [14/02/2020 / 10:57:36]

Start at : [14/02/2020 / 10:57:46]
Operation : Format File System / Reset Settings [ v1.27 ]
Settings : SmartFormat is On

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
-> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable

==== Wait for phone...

Phone found! [ 87 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
Boot failed!
DS : Loader start failed! Wrong Model selection!
Boot failed!

Reconnect Power/Cable!

Finish at : [14/02/2020 / 10:59:34]