GSM-Forum - View Single Post - 🐙 Post here success Reset FRP story with Octoplus FRP Tool

genci titi 2002 · 02-19-2020, 12:56

Welcome to Octoplus FRP Tool v.1.8.6.0
Platform: SAMSUNG
Selected model: SM-G928F
To put SM-G928F into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Searching for a phone. Please wait...
Phone found.
Initializing..
PIT was read successfully.
Searching for UART interface.. COM4
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Resetting FRP lock..
FRP lock is successfully reseted!
Wait 3-4 min then goto "Menu -> Settings -> Backup and reset" and make "Factory data reset"
Performed by 1.8.6.0 Software version.

02-19-2020, 12:56	#5740 (permalink)
genci titi 2002 No Life Poster Join Date: Oct 2005 Location: TITI 2002 SERVIS CELULAR PG/AL Posts: 4,181 Member: 193804 Status: Offline Sonork: 100.1684818 Thanks Meter: 1,691	SM-G928F FRP lock is successfully reseted! Welcome to Octoplus FRP Tool v.1.8.6.0 Platform: SAMSUNG Selected model: SM-G928F To put SM-G928F into Download Mode, You have to perform the following steps: 1. Reconnect the battery. 2. Press and hold "Volume-" + "Home" + "Power ON" keys. 3. When phone turns on, press "Volume+" key. Searching for a phone. Please wait... Phone found. Initializing.. PIT was read successfully. Searching for UART interface.. COM4 Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds Searching for device. Please wait... Resetting FRP lock.. FRP lock is successfully reseted! Wait 3-4 min then goto "Menu -> Settings -> Backup and reset" and make "Factory data reset" Performed by 1.8.6.0 Software version.