| 1=Open PBB
2=Go to connection
3=Set it to USB and Make it Up on top of other connections
4=Exit PBB
5=Connect your usb cable to your PC.Better the Back USB PORT,not the front.(But all work fine for me.)
6=Connect your phone(Phone must be ON) to your usb cable.
7=Windows XP detects new Hardware and will Install drivers.Wait till all drivers are Installed.
8=Open your PBB.
9=Detect your phone-Phone must be Found as a Usb device connected.
10=Try to Read Phone Infos.(Infos must be Read)
11=Go to flash/Upgrade TAB.
12=Phone Initial Origin should be selected and your latest Files filed.
13=Select your Laguange if necessary.
14=Click START for flashing.
Leave it flashed.It can take only some few minutes.
Wait till you see the message USB FLASHING COMPLETE SUCCESSFULLY.
Make sure to Un-tick FULL FACTORY SETTING AFTER FLASHing in your option if that is present.
------------------------- |