View Single Post
Old 05-01-2006, 08:15   #1 (permalink)
ChinaSpace
Freak Poster
 
Join Date: Oct 2002
Posts: 180
Member: 17223
Status: Offline
Thanks Meter: 18
Thumbs up Give the friends v903sh solution to press the password specially!

Today is 51 Labor Days!Wish everyone's festival happiness!Give the friends v903sh solution to press the password specially!
psw:chuangjianhejieshehui52zhongguorenminwansui

1.Don't put the battery in the phone,plug the 3.8V on the "+/-" of the battery

2.get 9V on the flash cable(stongly recommended our flash cable) cauctionO NOT USE RJ45 PLUG flash cable

3.use USB-SMART software,get the right flash files that needed. TIP the ‘Use Test Point’,then click "Do Selected Job"

4.when the software shows that"Please connect TP to GND" use the test needle to touch the point that shows on this pictures.(do not release until the words on step 5 that shows) press OK then plug in the flash cable

5.the software is in progress,after 3-5 seconeds the software shows "Please disconnect TP to GND"then remove the test needle,press ok. Upgrade is in progress now

6.need to unlock the phone after the upgrade,the way that about TEST POINT is the same
ORIGINAL Chinese POST link is here :the way for flash the newest 2006's V903sh that no need to open the machine

Really thanks for Sir.Zulea in deed
web: www.gsmcity.cn
mail/msn: [email protected]
icq:219889191
QQ(Chinese):670033 1580778
  Reply With Quote
The Following User Says Thank You to ChinaSpace For This Useful Post:
 
Page generated in 0.13833 seconds with 6 queries