GSM-Forum - View Single Post - Plantronics Pulsar 590A and Widcomm 5.1.0.1100

damole · 08-25-2006, 17:40

Well I found this forum

after reading this thread

http://www.notebookforums.com/thread130179.html

which included the link to remove the annoying (to me) habit of XP trying to load it's own drivers which is the first thing I would recommend to do.

Then I downloaded the file

http://rapidshare.de/files/19917941/...tcher.zip.html

Unzip the drivers, overwrite the btwusb.inf with one that contains the details of the Truemobile 350 device which can be found here

http://forum.gsmhosting.com/vbb/show...8&postcount=12

and install them. When prompted that the device cannot be found click cancel and continue to the end. Then run the included license patcher, my device was at the bottom of the pull down list, VendorID 413C and that was it. The blue system tray icon will ask you to start the device for the first time and then you should be away.

All of this information has been extracted from the work of others in this forum and this is just the way I used it during my own installation.

08-25-2006, 17:40	#3 (permalink)
damole Major Poster Join Date: Jul 2006 Posts: 43 Member: 318445 Status: Offline Thanks Meter: 1	Truemobile 350 installation Well I found this forum after reading this thread http://www.notebookforums.com/thread130179.html which included the link to remove the annoying (to me) habit of XP trying to load it's own drivers which is the first thing I would recommend to do. Then I downloaded the file http://rapidshare.de/files/19917941/...tcher.zip.html Unzip the drivers, overwrite the btwusb.inf with one that contains the details of the Truemobile 350 device which can be found here http://forum.gsmhosting.com/vbb/show...8&postcount=12 and install them. When prompted that the device cannot be found click cancel and continue to the end. Then run the included license patcher, my device was at the bottom of the pull down list, VendorID 413C and that was it. The blue system tray icon will ask you to start the device for the first time and then you should be away. All of this information has been extracted from the work of others in this forum and this is just the way I used it during my own installation.