I see on the screenshot that you check SkipErase and ForceCP Convert 128K.
skipErase will cause fault if the phone had different version installed!!!! so why do you do it? also are u sure page size is 128K? this would also cause phone not working!!! Bellow is log from flashing with this product code: Processing File: RM170p_06271.C02
Boot...
rap3gv3_2nd.fg
RAP3Gv3_algo.fg
Erase RAP3 [00380000 - 01F7FFFF]
Erase RAP3 [00000400 - 000006BF]
Erase RAP3 [000006C0 - 0000FFFF]
Erase RAP3 [00010000 - 000105FF]
Erase RAP3 [00010600 - 00010FFF]
Erase RAP3 [00011000 - 00011FFF]
Erase RAP3 [00012000 - 00013FFF]
Erase RAP3 [00020000 - 0013FFFF]
Erase RAP3 [00140000 - 0032FFFF]
Erase RAP3 [00330000 - 0033FFFF]
Erase RAP3 [00340000 - 0037FBFF]
Erase RAP3 [0037FC00 - 0037FFFF]
Erase RAP3 [01FA0000 - 01FEFFFF]
Erase RAP3 [00000000 - 012FFFFF]
Erase[50.76 MB]...
Waiting response for 320 Sec...in 183.36s
Flash[43.13 MB]...in 87.02s
* * Processed file in 276.98 seconds
Processing File: RM170_CHSIMP.U02
Boot...
rap3gv3_2nd.fg
RAP3Gv3_algo.fg
Erase RAP3 [03600000 - 07CFFFFF]
Erase[71.00 MB]...
Waiting response for 320 Sec...in 1.38s
Flash[0.08 MB]...in 1.88s
* * Processed file in 12.03 seconds
No need to extract content.
Processing File: RM170p_06271.L24
Boot...
rap3gv3_2nd.fg
RAP3Gv3_algo.fg
Erase RAP3 [01300000 - 035FFFFF]
Erase[35.00 MB]...
Waiting response for 320 Sec...in 1.00s
Flash[23.41 MB]...in 46.56s
* * Processed file in 54.09 seconds
* * * Phone flashing done in 6: 2 minutes
Post Flash serial tunning of phone....
Pooling mode for full factory set...
V 2.26.01/04-07-06/RM-170 (c) Nokia.
IMEI: ........
Factory Default Settings...OK
Pooling mode for profile update...
RM-170\RM-170_0535555_06.27.01_001.dcpf\06.27.01\ProductProf ile_v1.0.xml
Sending Profile to Phone...OK |