GSM-Forum - View Single Post

GSM_Support · 12-25-2006, 10:49

In case of getting an error "Clip communication failed", while detecting the handset, please check the output of Smart-Clip power source. For stable Smart-Clip functions the recommended power supply is 10V, 1A.

Some phone models use a data cable for charging. So, as soon as it gets connected to Smart-Clip it starts charging and uses about 500mA, plus Clip requires another 130-150mA.

Also, please ensure that your LPT port is set to EPP mode in BIOS and firewall with antivirus are disabled.

Best Regards
GSMServer team

12-25-2006, 10:49	#1 (permalink)
GSM_Support Product Supporter Join Date: Feb 2005 Location: GSMserver Team Posts: 36,980 Member: 121052 Status: Offline Sonork: 100.107126 Thanks Meter: 80,766	"Clip communication failed" issue In case of getting an error "Clip communication failed", while detecting the handset, please check the output of Smart-Clip power source. For stable Smart-Clip functions the recommended power supply is 10V, 1A. Some phone models use a data cable for charging. So, as soon as it gets connected to Smart-Clip it starts charging and uses about 500mA, plus Clip requires another 130-150mA. Also, please ensure that your LPT port is set to EPP mode in BIOS and firewall with antivirus are disabled. Best Regards GSMServer team Last edited by GSM_Support; 03-18-2010 at 10:48.