In this topic I will post info about latest updates of Typhoon Key.
*LATEST* Installer You can download from:
1)
http://www.karwosgsm.pl/typhoonkeyinstaller.exe
2)
http://www.karwossuite.pl/typhoonkeyinstaller.exe
For now, changelog of old releases of Typhoon Key Installers (up to latest v 1.0.7):
Typhoon Key Installer v1.0.7
========================
* KarwosSuite DCT4/WD2 v3.0R
- DCT4Plus unlock/relock/autolock bugs fixed (2310 v3.31 especially)
- New DCT4Plus unlock products added
- Added support for unlock/relock/autolock RH-86 2610 MCU v3.71
- Added support for unlock/relock/autolock RH-86 2610 MCU v4.51
- Added support for unlock/relock/autolock RH-87 2610b MCU v3.71
- Added support for unlock/relock/autolock RH-87 2610b MCU v4.51
- Added support for unlock/relock/autolock RM-225 6030b MCU v5.25
- Added support for unlock/relock/autolock RM-189 2310 MCU v3.21
- Added support for unlock/relock/autolock RH-93 1112 MCU v6.01
- Added support for unlock/relock/autolock RH-93 1110i MCU v6.01
- Added support for unlock/relock/autolock RH-94 1112b MCU v3.00
- Added support for unlock/relock/autolock RH-94 1112b MCU v3.11
- Added support for repair of 4 locks closed in ASIC11 2610 model (when "ASIC" is detected as "0")
- Fixed "this is not valid"...
- Totally rebuilt UFS Communication Routines
- `Security Code` backup fixed (grayed out item)
- "Check Flash Chips", for UFS only - this loading 2nd boot loader to phone and displays aviable flash chips in phone, and its Health status. Milestone (FlashBus implemented, finally).
- FIA Pack included (latest)
- Changed Typhoon key interface - now you can have connected few cards (setool, cruiser, etc). Software will choose compatible one.
- Minor changes/bugfixes
- Note: In order to use this update, card Indexes needs to be updated to v.5
- Code Optimizations for some CPUs
* New HDEFs included
Typhoon Key Installer v1.0.6
========================
* Activation Tool Rev. D2
- Added reading BOX+HWK status while sending Activation Request [Paired...Not Paired]
- Fixed "Licence: False" on some BOX SNs
* KarwosSuite 3 DCT4/WD2 v3.0q_fix1
- Fixed "Licence: False" on some BOX SNs
- Flashlight (avaiable in 5140i, 1100, etc) test added
- Authenthication time slightly improved
* New HDEFs included
* HotSupport v1.5.0
- Fixed "Crazy ProgressBar" problem
- New Download Manager introduced, it now shows Current Download Speed
- Download Interface rebuilt
Typhoon Key Installer v1.0.5
========================
* KarwosSuite v3.0q
- Indexation Server Error 0x01 - fixed
- Improved authenthication time
* KarwosSuite BB5 Tool v1.0b
- Indexation Server Error 0x01 - fixed
* KarwosSuite 3 Samsung 3G Inside v1.0b
- Indexation Server Error 0x01 - fixed
* Typhoon Key Calculator v1.0d
- Small GUI bugs fixed
* SLD Generator v2.0b
- Indexation Server Error 0x01 - fixed
* UFSx INI Generator v1.4
- Indexation Server Error 0x01 - fixed
Typhoon Key Installer v1.0.4
========================
* Installer
- DelZip 7.9 when Login/Password problem corrected
* HotSupport v1.4.6
- New HDEFs included
- Added aliases (3100->3120,2650->2652,etc)
* KarwosSuite v3.0p
- DCT4Plus unlock fixed ("Unsupported Product")
Typhoon Key Installer v1.0.3
========================
* HotSupport v1.4.5-fix1
- Fixed I/O Error 32 - FINALLY
Typhoon Key Installer v1.0.2
========================
* HotSupport v1.4.5
- Fixed I/O Error 35
* Installer
- Now asking whether user using Card or Login
Typhoon Key Installer v1.0.1
========================
* HotSupport v.1.4.4
- Added CPT Access Button (dostęp do Centrum Pomocy Technicznej)
- HotSupport.Ini changed to Environment.Ini
* CPT v1.0
- CPT Access tool for Typhoon Cards (również do szybkiego dostępu do CPT przez kartę)
* Typhoon Calcualtor v1.0c
- New phones supported: Alcatel *OLD*, Nokia DCT3, DCT4 ASIC 2,5,6,7
* HWK Killer annihilator v1.0
* DCT4/WD2 Simlock Generator v2.0
- Now is possible to manage locks on 4 levels (imsi,gid1,gid2,mcc-mnc) and can be locked/autolocked
* UFSx repair tool v 0.2
* UFSx INI Generator v1.3
* UFSx Fast Flash Tool v2.1b
* UFSx Counter Tool v1.1
* FIA Tool v1.0b
* KarwosSuite 3 Samsung 3G Quallcom Inside v1.0a
* KarwosSuite 3 DCT4/WD2 v3.0O
- New keys added to keyboard test (0x0A and 0x0B - volume up/volume down)
- New feature: IRDA subsystem testing
- Revised & Released: Sleep mode tests - now possible to make [ms] delay then reset/shutdown phone
- New Feature: auto changes-apply after low-level contrast write
- Phone Usage State now can switch phone to 3 diffrent phone modes: DEFECTIVE (contact service in result), EXCHANGE (new, used in authorized services), NORMAL
- New Feature: Tuning output level of buzzer volume [0..15], usefull in "quiet-buzzer" phones, use with caution.
- Fixed: Program hangsup if no SmartCard driver installed and interface is UFSx, and Auth-Type is KAc (not card)
- New feature: MMC Cards Testing
- New feature: FM Radio Testing - note you need HDS-3 in order to initialize Radio (And of course phone must support it), it was unfinished so for now only "Initialize" avaiable :-)
- Redesigned: GUI (previous was.. too small)
- New compatible products: NHL-4, NHL-4JX, RH-93, RH-86, RM-104
- Corrected PP editing on RH_64
- Checking UPP for UFSx Ready :-)
- DCT4Plus phones unlock solution is ready, tested, and prooved to work
- DCT4Plus Autolock IMSI implemented
- DCT4Plus Relock implemented
- Fixed "Access Violation" on some Configurations while reciving Frames
- BB5 Downgrade function added - just for testing
- Increased WD2 Bootup time
- Increased WD2 Stability in BBSelftests by increasing Execution Timeout
- BT Repair Added
- Improved phone attaching procedure for UFSx
- Improved UFSx Bootloader handler (now all going much faster)
- Product Profile Editor upgraded to 2.0 - now its TOTALLY rebuilt ! supports up to 512 descriptors
- Runtime Error 216 and other bugs - solved
- Attach phone procedure revised, now its asking whether new phone was connected or You just simply re-attaching old phone
- ASIC11 Warranty Editing Introduced (note this is not same as 2310,1600,1112-they are STILL ASICs2!)
- Realtime Contrast Tuning fixed for 2610 and such phones
- ASIC11-Only Production Data Writing support
- ASIC11 support for Phone-Usage state changing
- Filesystem format introduced ! supported FS: FILE2, Symbian EPOC
- Format user area for WD2 moved to FS Tab
- Disabled calcualting Unlock codes for ASIC11 (since some guys entered calcualted BAD codes!)
- Improved platform selecting algorithm (DCT4/WD2) now it detects automatically all WD2 phones and auto-selecting
- "Repowering".. loop-bug fixed
- Fixed : "/*" is not valid integer value
- Stop button added ;-) This totally "cut-out" FBUS transmission when needed.
- Warranty Recover for some ASIC6-like phones - 5140i corrected ("Update not accepted")
- Now there is 3 types of "Warranty" Handling
* Standard (for UPPs 0xxx, 1xxx)
* Fixed - UPP 2xxx (Field-Switch Nokia Trick) - solved (6230, 6230i, 5140i, 6020, etc)
* Fixed - UPP 3xxx - Nokia PM Fields protection - solution still exists
But: NO IMEI write, Just made/repair/purchased dates, and NO recovery support
- Fixed problem for UPPs 3xxx and 2xxx, when after Attach no IMEI presents in "*#war0anty#" tab
- New Backup items: Radio Stations, MMC Card Settings (Passwords), Calendar Settings
- FBUS routines totally rebuilt - application is now much smoothly
- PPUs updated
- Rebuild definitions updated
- And as always many small bugfixes/changes... prepare for NEXT cool UPDATES!
* Activation Tool Rev. D1
* KarwosSuite 3 BB5 Tool v1.0a
* Typhoon Key Maintenance Tool v2.0b