GSM-Forum - View Single Post

karwos · 04-17-2007, 22:29

FAQ2. Pairing UFS box with Card to activate KarwosSuite 3 DCT4/WD2

1. Connect Your UFS-3 Box to computer
2. Run: Start -> Programs -> Typhoon Key -> KarwosSuite 3 DCT4/WD2 -> Activation Tool

3. Click "Init UFSx"

4. Click "Request KAC"
5. Wait about minute - sofware will connect to our server, charge one credit and proceed generation of KAC file

6. Save KAC file in safe place - this file will be helpful in future !!!

7. Start Typhoon Key Maintenance Tool
8. Click Select Reader
9. Select FT SCR2000 0
10. Click Store KAC and select previously saved KAC file

11. Process of card pairment will be started, after this card needs to be re-activated (re-signed).
12. Done - Your card is paired with UFS box.

04-17-2007, 22:29	#3 (permalink)
karwos No Life Poster Join Date: Feb 2005 Location: Poland Age: 34 Posts: 4,943 Member: 117496 Status: Offline Sonork: 100.83919 Thanks Meter: 22,689	FAQ2. Pairing UFS box with Card to activate KarwosSuite 3 DCT4/WD2 1. Connect Your UFS-3 Box to computer 2. Run: Start -> Programs -> Typhoon Key -> KarwosSuite 3 DCT4/WD2 -> Activation Tool 3. Click "Init UFSx" 4. Click "Request KAC" 5. Wait about minute - sofware will connect to our server, charge one credit and proceed generation of KAC file 6. Save KAC file in safe place - this file will be helpful in future !!! 7. Start Typhoon Key Maintenance Tool 8. Click Select Reader 9. Select FT SCR2000 0 10. Click Store KAC and select previously saved KAC file 11. Process of card pairment will be started, after this card needs to be re-activated (re-signed). 12. Done - Your card is paired with UFS box. Last edited by karwos; 04-17-2007 at 22:47.