| COM1 [Serial0] selected
Device: Autodetect
Checking data, wait...
advanced flash detection active
Action: reset
Boot...
Press and HOLD Power button now !
baud autodetection active
error: initialization3 failed: FE
error: initialization2 failed: F0
error: initialization2 failed: F0
error: initialization3 failed: C1
error: initialization3 failed: FF
19200
Connecting, wait...
error: boot phase#1 failed
Release Power button now !
In case of initial connection problem: on/off "Boot baudrate autoselect" box.
Boot Fail
Finished, time used: 4 sec
Remove/Install battery now ! |