GSM-Forum - View Single Post - help needed.k800 gone dead by bad flasing

RAND CELLULAR · 09-04-2007, 16:25

i am trying to recover a dead k800....plz help...here is the post...

System diagnostics passed.
Version 12.00 ready!
Do NOT connect the phone at this time!

[ --- Attach to Phone --- ]
Connecting via SEMC DCU-60...
Connect the phone while holding its C button!
USB connection established.
Baseband chip ID: 0x9900
Protocol version: 3.1
Booting via ROM...
Trying CID52 recovery applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 0s
Initializing phone hardware...
Applet ID: 061220 1711 NPA4_CXC1329130_DB2020_...

[ --- Detach Phone --- ]
Terminating threads...
Terminating threads...
All threads terminated.
All threads terminated.

[ --- Attach to Phone --- ]
Connecting via SEMC DCU-60...
Connect the phone while holding its C button!
USB connection established.
Baseband chip ID: 0x9900
Protocol version: 3.1
Booting via ROM...
Trying CID52 recovery applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 0s
Initializing phone hardware...
Applet ID: 061220 1711 NPA4_CXC1329130_DB2020_...
Flash manufacturer: Intel
Flash ID: 0x897E
OTP Security Level: 1 (Retail)
OTP CID: 49
Primary certificate not found.
Phone CID: 52
RSA protection state cannot be determined for this CID.
Phone hardware initialized OK

[ --- Flash Main Firmware --- ]
Flash file: "K800i_CXC1250211_Vodafone_R1CE001_Red52.ck8sw "
Waiting for flash file to load...
Preparing to program flash...
Programming flash...

when i try flashing it says
rror flashing block at address: 0x44140000
Script error: Flash error [12.00.78]

09-04-2007, 16:25	#1 (permalink)
RAND CELLULAR Freak Poster Join Date: Mar 2006 Posts: 211 Member: 238559 Status: Offline Thanks Meter: 2	help needed.k800 gone dead by bad flasing i am trying to recover a dead k800....plz help...here is the post... System diagnostics passed. Version 12.00 ready! Do NOT connect the phone at this time! [ --- Attach to Phone --- ] Connecting via SEMC DCU-60... Connect the phone while holding its C button! USB connection established. Baseband chip ID: 0x9900 Protocol version: 3.1 Booting via ROM... Trying CID52 recovery applet... Sending applet prologue... Sending applet body... Time spent entering bootstrap: 0s Initializing phone hardware... Applet ID: 061220 1711 NPA4_CXC1329130_DB2020_... [ --- Detach Phone --- ] Terminating threads... Terminating threads... All threads terminated. All threads terminated. [ --- Attach to Phone --- ] Connecting via SEMC DCU-60... Connect the phone while holding its C button! USB connection established. Baseband chip ID: 0x9900 Protocol version: 3.1 Booting via ROM... Trying CID52 recovery applet... Sending applet prologue... Sending applet body... Time spent entering bootstrap: 0s Initializing phone hardware... Applet ID: 061220 1711 NPA4_CXC1329130_DB2020_... Flash manufacturer: Intel Flash ID: 0x897E OTP Security Level: 1 (Retail) OTP CID: 49 Primary certificate not found. Phone CID: 52 RSA protection state cannot be determined for this CID. Phone hardware initialized OK [ --- Flash Main Firmware --- ] Flash file: "K800i_CXC1250211_Vodafone_R1CE001_Red52.ck8sw " Waiting for flash file to load... Preparing to program flash... Programming flash... when i try flashing it says rror flashing block at address: 0x44140000 Script error: Flash error [12.00.78]