Quote:
Originally Posted by alfox  At last the latest update from bb5 box version 0.21 now supports any flash chip kind with 6300 and with additional feature where you could choose which flash chip to use either atd,atb or etc....and now the unlocking steps still the same easy with 3 seconds phone unlocked..thanks to raskal team....btw i forgot to mention my unit has atd flash chip....
Searching for phone ...
Phone found on FBUS interface
Reading phone info ...
Type: RM-217
Version: V_05.00_27-04-07_RM-217_(c)_Nokia.
IMEI: 357671xxxxx7570
SP LOCK status:
Block 1: CLOSED Type 5 Data: 51502F
Block 2: CLOSED Type 5 Data: 51502F
Keyboard wrong codes counter: 0 wrong tries from max. 3 tries
Cable wrong codes counter: 0 wrong tries from max. 10 tries
Create autobackup of PM 308
Reading PM Field 308 Subfield 1 with length 8192 bytes
Saving autobackup to file: RM-217_357671xxxxx7570_Locked_Keycnt_0_Fbuscnt_0__V_0 5.00_27-04-07_RM-217_(c)_Nokia..bin
Checking if model/version is supported for unlock ...
Set Full Factory Defaults ...
Full Factory Defaults set OK
Please connect testpoints
Testpoints connected OK
Keep Testpoints connected until unlock finish!
Unlocking phone ...
Try number: 1
Sending SP code: #pw+012345678901234+7#
Response byte: 00
Reading again SP Locks ...
SP LOCK status:
Block 1: OPEN Type 5 Data: 51502F
Block 2: OPEN Type 5 Data: 51502F
Keyboard wrong codes counter: 0 wrong tries from max. 3 tries
Cable wrong codes counter: 0 wrong tries from max. 10 tries
Phone unlocked succesfull |
Sound good...
but check this
Searching for phone ...
Phone found on FBUS interface
Reading phone info ...
Type: RM-217
Version: V_04.71_28-02-07_RM-217_(c)_Nokia.
IMEI: 353932019429635
SP LOCK status:
Block 1: CLOSED Type 5 Data: 50503F
Block 2: CLOSED Type 5 Data: 50503F
Keyboard wrong codes counter: 0 wrong tries from max. 3 tries
Cable wrong codes counter: 0 wrong tries from max. 10 tries
Skip autobackup of PM 308
Autobackup file:
RM-217_353932019429635_Locked_Keycnt_0_Fbuscnt_0__V_0 4.71_28-02-07_RM-217_(c)_Nokia..bin
already exist
Checking if model/version is supported for unlock ...
ERROR: Not suported model/version
sec xxxxxxxx ATB not support yet!!!!