| hello
phone asks for master password
read codes:
read spunlock
COM8 [VCP0] selected
Phone should be Switched OFF !
Press and HOLD Power button now !
19200
Initializing[6219:8B02]...
Connecting, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6219B,E02
Date: 2005.04.12
Version: 1.0
Version: SL900A.05C.W06.08.MP.V64
Version: ESL6227_05C_HW
imei: 35385801023225
Phone lock: Off
Network lock: On
Network subset lock: Off
Service provider lock: On
Corporate lock: Off
IMSI lock: Off
Auto lock: Off
NP code: 11304183
locked to: FFF-FF
NP of SP: 234-F0
SP code: 04162654
Phone code: 0000
Finished, time used: 60 sec
Remove/Install battery now !
these codes are not accepted
--------------------------------
unlock standard:
COM8 [VCP0] selected
Device: Emblaze Touch7
Checking data, wait...
advanced flash detection active
Action: unlock
unlock method: standard
Boot...
Press and HOLD Power button now !
Connecting, wait...
Initializing[6219:8B02:8B01]...
MT6226MA detected
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 89881500010001:89881500000000
flash: Intel Intel/Sharp ext [def 0004x008000 007Fx020000] 16Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud...
921600
Set baud Done
Identification...
detect device identification, method #1...
detection phase #1...
detect device parameters finished
structure: 2nd [standard] (or higher) generation
protocol ver: 04
ver. sw1: SL900A_UK_PCB01_GPRS_MT6226M_S01.SL900A_05C_W06_08 _MP_V64.BIN
ver. sw2: SL900A.05C.W06.08.MP.V64
ffs offset/size: 00E00000/00200000
reading [eeprom[SL900A_UK_PCB01_GPRS_MT6226M_S01.SL900A_05C_W06_08 _MP_V64.BIN]]...
file saved: backup_eeprom[SL900A_UK_PCB01_GPRS_MT6226M_S01.SL900A_05C_W06_08 _MP_V64.BIN]_20070928-154834.B0E.bin
flash: 89881500010001:89881500000000
Identification Done
Manipulation...
detection procedure, wait...
detection procedure completed
Manipulation Done
Finalization...
.................................
flash: 89881500010001:89881500000000
flash: 89881500010001:89881500000000
Write: area 0/1
...............................
Finalization Done
Write...
flash: 89881500010001:89881500000000
Write: eeprom
Write Done
Finished, time used: 179 sec
Remove/Install battery now !
phone unlocked ok
thanks |