| Motorola c261
I have c261. It was on contact service Provider. I flashed it. then it started restarting, then i flshed with differ version, restarting stoped and now it is giving signal problem. First time flashed log file is as under:
COM3 [VCP1] selected
"smart write" active
Action: flash
Write: Firmware
Write: Language Pack
Write: Flex
Skip: Eeprom
Device: C261
Checking data, wait...
Connect...
Press and HOLD Power button...
Connecting...
initial boot phase complete
Release Power button !
Connect Done
Boot...
Boot Done
Set Baud...
115200
Set Baud Done
Check Flash-1...
SW version: 0.1.76
HW version: MOTOROLA_E58S
LP ver: LPNA_0176
Flex ver: FLEX_90_64_5009
cpu id: 08B6
imei eeprom: 01091100594796
required SW version: 0.1.76
sp-locked: 302720302370
You want to write Flex in sp-locked[302720302370] phone,
Make this only when you understand what you want to do !
Are you sure you want to continue ?
user confirmed Flex write operation for sp-locked phone
Check Flash-1 Done
Check Flash-2...
reading ...
file saved: backup_eeprom_calibration_01091100594796_20071008-040448.34E.bin
Check Flash-2 Done
Write...
Writing: Firmware
Writing: Language Pack
Writing: Flex
Write Done
Finished, time used: 1368 sec
Remove/Install battery now !
After that i flashed again it flashed successfully and now it is giving signal problem:
COM3 [VCP0] selected
"smart write" active
Action: flash
Write: Firmware
Write: Language Pack
Write: Flex
Skip: Eeprom
Device: C261
Checking data, wait...
Connect...
Press and HOLD Power button...
Connecting...
initial boot phase complete
Release Power button !
Connect Done
Boot...
Boot Done
Set Baud...
460800
Set Baud Done
Check Flash-1...
SW version: 0.1.76
HW version: MOTOROLA_E58S
LP ver: LPNA_0176
Flex ver: FLEX_90_64_3903
cpu id: 08B6
imei eeprom: 01091100594796
required SW version: 0.1.76
Check Flash-1 Done
Check Flash-2...
reading ...
file saved: backup_eeprom_calibration_01091100594796_20071008-225922.34E.bin
Check Flash-2 Done
Write...
Writing: Firmware
Writing: Language Pack
Writing: Flex
Write Done
Finished, time used: 520 sec
Remove/Install battery now !
Inifnity Team: Plz help me to slove this problem
WAITING FOR QUICK REPLY |