Quote:
Originally Posted by GSMCrazy1  1. Describe your problem so detailed as possible.
problem in phone is that when i press power button it does'nt power on
2. What was phone condition before unlock/flash ?
same as i discribe above
3. What files was used for flashing ?
here is log
COM3 selected
Device: Autodetect
Checking data, wait...
advanced flash detection active
Action: read/check detailed information
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6217:8A00]...
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 01227E22212200
flash: 29EA0000000000
flash: Amd, AMD/Fujitsu std [0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud...
921600
Set baud Done
Check space...
operation mode: Fast detection mode
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: 01227E22212200
flash: 29EA0000000000
flash: Amd, AMD/Fujitsu std [0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detecting eeprom area in 1 chip(s)...
flash: 01227E22212200
flash: 29EA0000000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom found near: 00E00000
detecting eeprom size...
eeprom size: 00200000
eeprom chip: 00
eeprom area detected[00000000]: 00E00000-00FFFFFF
detect device identification, method #1...
detection phase #1...
.
detection phase #2...
..........................
protocol version: 0001
version sw1: LCT_X200_01_PCB01_GSM_MT6217_BN.L594204_5_3_1_1T02 M0922_M401B.BI
version sw2: N
detection phase #3...
.................................................. ..............
detect device parameters finished
detecting languages...
....................
language parameters detected
detected languages: En Vn
file saved: backup_system_log[LCT_X200_01_PCB01_GSM_MT6217_BN.L594204_5_3_1_1T02 M0922_M401B.BI]_20070603-231634.B0X.bin
Finished, time used: 96 sec
Remove/Install battery now !
4. What is phone condition now ?
i couldn't found any flash related to log file
5. Include in your message Log file (or text from software Log window) so we can see the place with errors/problems.
6. Please, note: message "not work" is NOT A PROBLEM DESCRIPTION.
regards
GSMcrazy1 |
hi,can u please help this forum out by posting here the pinout for this fone,that would really go a long way in helping others who need it and to get the flash file