N72 restart with sim complaint.formate the set.now working good.log is here.
COM3 [VCP0] selected
Device: Autodetect 6205-6227,6228 NOR
Checking data, wait...
advanced flash detection active
Action: reset
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6226:8A02:8A01]...
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud...
115200
Set baud Done
Identification...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification, method #1...
detection phase #1...
detect device parameters finished
structure: 2nd [enhanced] (or higher) generation
identification data Ok
identification data backup saved: id.52E6881C.[TELSDA26_05C_PCB01_GPRS_MT6226_S01.BASECODE.BIN_BA 219E82].rpl
New firmware detected: TELSDA26_05C_PCB01_GPRS_MT6226_S01.BASECODE.BIN
- make "Read detailed information, ask/rpl" operation
- send "backup_system_log_..." file to support
- make "Read full flash" operation
- send flash backup file(s) to support
- include in your e-mail full text from phone back label (phone name etc.)
identification detection finished
device-id: 52E6881C
protocol ver: 04
ver. sw1: TELSDA26_05C_PCB01_GPRS_MT6226_S01.BASECODE.BIN
ver. sw2: BASECODE
ffs offset/size: 00E00000/00200000
detecting eeprom area in 1 chip(s)...
flash: 01227E22202200:29EA0000000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom found near: 00E00000
detecting eeprom size...
eeprom size: 00200000
eeprom chip: 00
eeprom area: 00000000:00E00000-00FFFFFF
reading [eeprom[TELSDA26_05C_PCB01_GPRS_MT6226_S01.BASECODE.BIN]]...
file saved: backup_eeprom[TELSDA26_05C_PCB01_GPRS_MT6226_S01.BASECODE.BIN]_20071002-151821.B0E.bin
flash: 01227E22202200:29EA0000000000
Identification Done
Manipulation...
Manipulation Done
Finalization...
Finalization Done
Write...
formatting...
flash: 01227E22202200:29EA0000000000
Write Done
file saved: backup_system_log_52E6881C_TELSDA26_05C_PCB01_GPRS _MT6226_S01.BASECODE.BIN_BA219E82_20071002-151837.B0X.bin
Finished, time used: 328 sec
Remove/Install battery now !
