GSM-Forum - View Single Post - KS 4.0a Ready! BB5 USB Flashing inc. Dead phones! Full BB5 USB Support! And more more

karwos · 12-09-2007, 21:45

Hello
after some time of maintenance,
the time for new release has came !

KarwosSuite v4.0A Multiplatform Released!

What's new?

Added support for BB5 Nokia phones through USB CA-53, DKU-2 cable, Now ALL SERVICE FUNCTIONS (including Security Code hack) could be used using ONLY THIS CABLE! no more problems with resistors, etc
Added support for flashing Nokia DCT4 ADSP phones (3300, N-Gage)
Added support for flashing Nokia DCT4 APE phones (7710, 9300, 9500, etc)
Added support for flashing Nokia BB5 phones (tested on many pcs and all looks like working ok, but i know it still may contain bugs, so be sure you are supported with FBUS flasher eventually)
For USB-BB5 functionality, no box is needed. Just activated dongle.
Added support for UFSx v2,8 firmware
Added support for reading "FBUS Count" of NCK code in DCT4 family phones
Added support for unlocking DCT4 phones with newer SimlockServer (i.e. 6230i) - JUST FOR EXPERIMENTS
Rewritten "FS Initialize" for BB5 phones
Added FBUS FlashBus for BB5 Phones
Added support for VistaOS
ASKs is now in unique KarwosSuite format
ASK request Certificate file could be now readen in 4 diffrent ways:
- Through FBUS cable using FBUS interface
- Through FBUS cable using FLASHBUS interface
- Through USB cable using FBUS interface
- Through USB cable using FLASHBUS (through BOOTROM) interface
Added some prototype support for LG Shine, ***** phones (IMEI, SL)
GUI redesigned
Rewritten Security Code routines, this should work now on _ALL_ Nokia Phones
Support for FS format:
- High Density
- Low Density
- Full
- Low Level
Added support for PKEY-V readers
Rewritten Phone-Mode switch routines, now SW can detect (eventually switch) following modes:
- Power Off
- Normal
- Charging
- Alarm
- Test
- Local
- Warranty
- Reliability
- Selftest Fail
- Software Download
- RF Inactive
- ID Write
- Discharging
- SW Reset
Added Skip Read extended info, to skip reading additional info if cable problem occurs
Improved BB5 Selftests
Added "Install product support"
Removed "Flash area RPL backup". No needed anymore; is being done AUTOMATICALLY after attach.
Many many internal changes, bugfixes including code refactorization
Improved BB5 Phonebook recovery for nonSymbian phones, tested with 6300
Customization / Product Profile Unit / ADC Settings / LCD Settings / Product Profile / Product Specific Data added for: RH-38 1100a; RH-36 1100b; RH-75 1101; RH-70 1110; RH-93 1112(1110i); RH-92 1112b; RH-94 1112i; RH-99 1200; NKC-1 1220; RH-64 1600; RH-65 1600b; RM-4 2300; RM-5 2300a; RM-189 2310; RH-59 2600; RH-86 2610; RM-291 2626; RM-298 2630; RH-53 2650; RH-54 2651; RM-292 2660; RM-258 2760; RH-19 3100; RH-50 3100b; RH-6 3108; RM-274 3109 Classic; RM-237 3110 Classic; RH-30 3200; RH-31 3200b; RH-37 3220; RH-49 3220b; RM-38 3250; RM-51 3230; NEM-1 3300; NEM-2 3300b; NHM-8 3510; RH-9 3510i; RH-21 3520; NHL-8 3650; NHL-8 3660; NPM-6 5100; NPM-6X 5100a; NPL-5 5140; RM-104 5140i; RM-174 5200; RM-146 5200; RM-86 5500; RM-230 5700; RM-30 6020; RM-31 6020b; RM-94 6021; RM-74 6030; RH-73 6060; RH-97 6060v; RH-74 6061; RH-98 6061v; RM-166 6070; RM-167 6070b; RM-198 6085; RM-188 6086; NPL-2 6100; RM-76 6101; RM-77 6101b; RM-161 6103; RM-162 6103b; RM-122 6110Classic; RM-82 6111; RM-243 6120Classic; RM-178 6125; RM-126 6126; RM-115 6131; RM-2161 6131nfc; RM-199 6136; RM-200 6151; RM-47 6170; RM-48 6170b; NPL-3 6200; RH-20 6220; RH-12 6230; RH-28 6230b; RM-72 6230i; RM-145 6233; RM-123 6234; RM-25 6260; RM-210 6267; RM-56 6270; RM-78 6280; RM-176 6290; RM-217 6300; NPE-4 6310; NPL-1 6310i; NPM-9 6510; NHL-10 6600; NHL-4U 6610; RM-37 6610i; NHL-12 6620; RM-1 6630; NHM-1 6650; RH-67 6670; RH-68 6670b; RM-36 6680; RM-57 6681; RM-58 6682; NHL-6 6800; RM-2 6810; NHL-9 6820; RH-26 6820b; RM-69 6822a; RM-68 6822b; RH-23 7200; NHL-4 7210; NHL-4J 7250; More in next versions.

Where to download?
Use "Typhoon Updater", it will automatically download and update all needed files.

Screenshots, example 3250 RM-38 Revive via USB

Flashing, part 1

Flashing, part 2

After flash, phone restarted in TEST mode, and all working ok

Note that BB5 functions needs additional activation, for this contact any of our resellers.
Of course all other things like LG support, DCT4 ADSP flash, DCT4 ape flash, are included into standard DCT4 pack activation.

The card indexes MUST BE updated before using this version (1,15).

BR,
karwos

12-09-2007, 21:45	#1 (permalink)
karwos No Life Poster Join Date: Feb 2005 Location: Poland Age: 34 Posts: 4,943 Member: 117496 Status: Offline Sonork: 100.83919 Thanks Meter: 22,689	KS 4.0a Ready! BB5 USB Flashing inc. Dead phones! Full BB5 USB Support! And more more Hello after some time of maintenance, the time for new release has came ! KarwosSuite v4.0A Multiplatform Released! What's new? Added support for BB5 Nokia phones through USB CA-53, DKU-2 cable, Now ALL SERVICE FUNCTIONS (including Security Code hack) could be used using ONLY THIS CABLE! no more problems with resistors, etc Added support for flashing Nokia DCT4 ADSP phones (3300, N-Gage) Added support for flashing Nokia DCT4 APE phones (7710, 9300, 9500, etc) Added support for flashing Nokia BB5 phones (tested on many pcs and all looks like working ok, but i know it still may contain bugs, so be sure you are supported with FBUS flasher eventually) For USB-BB5 functionality, no box is needed. Just activated dongle. Added support for UFSx v2,8 firmware Added support for reading "FBUS Count" of NCK code in DCT4 family phones Added support for unlocking DCT4 phones with newer SimlockServer (i.e. 6230i) - JUST FOR EXPERIMENTS Rewritten "FS Initialize" for BB5 phones Added FBUS FlashBus for BB5 Phones Added support for VistaOS ASKs is now in unique KarwosSuite format ASK request Certificate file could be now readen in 4 diffrent ways: - Through FBUS cable using FBUS interface - Through FBUS cable using FLASHBUS interface - Through USB cable using FBUS interface - Through USB cable using FLASHBUS (through BOOTROM) interface Added some prototype support for LG Shine, *** phones (IMEI, SL) GUI redesigned Rewritten Security Code routines, this should work now on _ALL_ Nokia Phones Support for FS format: - High Density - Low Density - Full - Low Level Added support for PKEY-V readers Rewritten Phone-Mode switch routines, now SW can detect (eventually switch) following modes: - Power Off - Normal - Charging - Alarm - Test - Local - Warranty - Reliability - Selftest Fail - Software Download - RF Inactive - ID Write - Discharging - SW Reset Added Skip Read extended info, to skip reading additional info if cable problem occurs Improved BB5 Selftests Added "Install product support" Removed "Flash area RPL backup". No needed anymore; is being done AUTOMATICALLY after attach. Many many internal changes, bugfixes including code refactorization Improved BB5 Phonebook recovery for nonSymbian phones, tested with 6300 Customization / Product Profile Unit / ADC Settings / LCD Settings / Product Profile / Product Specific Data added for: RH-38 1100a; RH-36 1100b; RH-75 1101; RH-70 1110; RH-93 1112(1110i); RH-92 1112b; RH-94 1112i; RH-99 1200; NKC-1 1220; RH-64 1600; RH-65 1600b; RM-4 2300; RM-5 2300a; RM-189 2310; RH-59 2600; RH-86 2610; RM-291 2626; RM-298 2630; RH-53 2650; RH-54 2651; RM-292 2660; RM-258 2760; RH-19 3100; RH-50 3100b; RH-6 3108; RM-274 3109 Classic; RM-237 3110 Classic; RH-30 3200; RH-31 3200b; RH-37 3220; RH-49 3220b; RM-38 3250; RM-51 3230; NEM-1 3300; NEM-2 3300b; NHM-8 3510; RH-9 3510i; RH-21 3520; NHL-8 3650; NHL-8 3660; NPM-6 5100; NPM-6X 5100a; NPL-5 5140; RM-104 5140i; RM-174 5200; RM-146 5200; RM-86 5500; RM-230 5700; RM-30 6020; RM-31 6020b; RM-94 6021; RM-74 6030; RH-73 6060; RH-97 6060v; RH-74 6061; RH-98 6061v; RM-166 6070; RM-167 6070b; RM-198 6085; RM-188 6086; NPL-2 6100; RM-76 6101; RM-77 6101b; RM-161 6103; RM-162 6103b; RM-122 6110Classic; RM-82 6111; RM-243 6120Classic; RM-178 6125; RM-126 6126; RM-115 6131; RM-2161 6131nfc; RM-199 6136; RM-200 6151; RM-47 6170; RM-48 6170b; NPL-3 6200; RH-20 6220; RH-12 6230; RH-28 6230b; RM-72 6230i; RM-145 6233; RM-123 6234; RM-25 6260; RM-210 6267; RM-56 6270; RM-78 6280; RM-176 6290; RM-217 6300; NPE-4 6310; NPL-1 6310i; NPM-9 6510; NHL-10 6600; NHL-4U 6610; RM-37 6610i; NHL-12 6620; RM-1 6630; NHM-1 6650; RH-67 6670; RH-68 6670b; RM-36 6680; RM-57 6681; RM-58 6682; NHL-6 6800; RM-2 6810; NHL-9 6820; RH-26 6820b; RM-69 6822a; RM-68 6822b; RH-23 7200; NHL-4 7210; NHL-4J 7250; More in next versions. Where to download? Use "Typhoon Updater", it will automatically download and update all needed files. Screenshots, example 3250 RM-38 Revive via USB** Flashing, part 1 Flashing, part 2 After flash, phone restarted in TEST mode, and all working ok Note that BB5 functions needs additional activation, for this contact any of our resellers. Of course all other things like LG support, DCT4 ADSP flash, DCT4 ape flash, are included into standard DCT4 pack activation. The card indexes MUST BE updated before using this version (1,15). BR, karwos Last edited by karwos; 12-09-2007 at 22:09.