View Single Post
Old 02-09-2003, 11:08   #7 (permalink)
sPoK
Freak Poster
 
sPoK's Avatar
 
Join Date: Nov 2002
Location: EVO VIII FQ400
Age: 44
Posts: 188
Member: 17806
Status: Offline
Thanks Meter: 8
Quote:
Originally posted by Dentin
Can you tell me where is that post about increasing flex memory because I missed that topic and ofcourse I am very interesting in it.
[/B]
deleted
But, here it is

Here's how to increase your Flexmem capacity
I've been researching my ME45i (ME45 with an S45i firmware) Flexmem and
it turned out that it's merely a virtual harddisk image.

Since it uses an old fashioned FAT file system, I've managed tweak it
to gain some additional storage capacity.

The original Flexmem capacity is 348KBytes and the Flexmem I tweaked is
393.5KBytes. Gaining up to 45.5KBytes of additional space (13% larger).

However, it seems that the last 512Bytes can not be used. It always
pops up an error, reporting that there are no more space left. Could
anyone check it before using the tweaked Flexmem? Thanks.

The other downside is that if you format the tweaked Flexmem via Data
Exchange or via your phone, the Flexmem's capacity will be restored
back to 348KBytes. You will need to perform the task as described above
again in order to have a total capacity of 393.5KBytes.

I've posted the URL to my empty tweaked Flexmem (see below). Use
UniSiemens (with usimload; ^_^ tee... hee...) or Siemens S45-ME45 Tools
to upload the Flexmem into address 140000 (the size is 080000).

You should backup your whole contents of Flexmem using one of those
applications to backup directly. Or you can use Data Exchange (for
Flexmem files) and VisSie / Mobile Navigator (for Addressbook) to
backup indirectly. Indirect backup is recomended if you intend to use
the tweaked Flexmem for long term.

Right after you uploaded the tweaked Flexmem and turned on your phone,
check your Addressbook by creating a new entry then view it.

Remember, this Flexmem has been tested on S45i firmware only (mine was
version 04). It may not work for other firmware versions (including
ME45 & S45).

For NRG and SkyLord: If you are reading this, could you find the
firmware code for the Flexmem formatting and have it patched? So when
everytime the Flexmem is formatted, it will be already tweaked? Thanks.


tweaked Flexmem :
http://www.elitesecurity.org/poruka/fajluzporuku/139085

Last edited by sPoK; 02-09-2003 at 11:14.
  Reply With Quote
 
Page generated in 0.11847 seconds with 7 queries