Quote:
Originally Posted by X-Shadow  @ronskiton_ron
N76 cannot be unlocked using DK's theory because it is using NAND flash and
the firmware is compressed (Zlib) and it is only uncompressed in the RAM prior
to execution. In short,,, it will be like unlocking a DCT4 phone using a DCT3 clip.
It is not compatible with TP unlocking as of the moment.
Please tell me what exactly was your problem with the N73?
RE:
"Searching for phone ...
Phone found on FBUS interface
Reading phone info ...
Type: RM-133
Version: V_05wk47v39_30-11-06_RM-133_(c)_Nokia.
IMEI: XXXXXXXX
Keyboard wrong codes counter: 0 wrong tries from max. 3 tries
Cable wrong codes counter: 0 wrong tries from max. 10 tries
Reading PM Field 308 Subfield 1 with length 8192 bytes
NOT WORKING"
That is a readout using another software and not AdvanceUFS software...
Also, you do not need to connect the Battery GND and the Alligator GND to
the phone. This connections are optional and you can choose not to use
them and rely only on the GND in the POP port. All our 20++ test phones here
were unlocked using only the GND in the POP Port Only... We only put the
additional two GNDs as a backup...
V_05wk47v39 <--- if this is the current version of your N73, then I think it is
a Japanese Firmware and I do not have access to Japanese firmwares as of the
moment as they are very rare to come by. My suggestion would be that you
should upgrade that N73 with the latest firmware version so that it you can
use direct unlock function.
There is no danger in upgrading, and I am sure you will unlock the phone after
you do the upgrade.
Also,,, for the TP Pins,,, BLACK is CLK... YELLOW is ADX
B.R. |
yes this already unlock by bb5 raskal
thanks for fast reply next time im using your advance-bb5 to another
model of phones i hope ........ im gona succesfully unlock bb5 phone using
advance bb55 ......again thanks .
