GSM-Forum - View Single Post - TELSDA26 N95 8GB IMEI write OK but still the same IMEI on the phone!!

KUBAT1 · 03-04-2008, 18:15

mate! I said I did all you want before, the same, IMEI can not be changed!!!

PLEASE URGENT HELP NEEDED, IT HAS BEEN 10 DAYS I AM WORKING ON THESE PHONES, FIRST I COULD NOT EDIT THIS FIRMWARE NOW CAN NOT WRITE IMEI, MY CLIENT IN HURRY, AND MAKES PROBLEM, NOW WAITING YOUR SOLUTION VERY URGENT..
regards

1. type *#06#, what imei you see on LCD ?

Typing *#06#, Phone IMEI is 355255016112340 but when you read general information from software it is

Action: read information
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
Phone detected, wait...
Hardware version: AT+EGMR=0,0
Software version: AT+EGMR=0,3
Barcode: MT012345678901234567
imei: 135790246811220
Finished, time used: 98 sec
Power off phone now !

2. write imei by mode 1

wri**** 35605100997248 to the phone with mode-1

Action: imei
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
Phone detected, wait...
Hardware version: AT+EGMR=0,0
Software version: AT+EGMR=0,3
Barcode: MT012345678901234567
imei: 135790246811220
imei write method: mode-1
new imei: 356051009972483
imei verified Ok
Finished, time used: 13 sec
Power off phone now !

3. Power-Off phone with phone "Power" button but don't remove battery !

powered phone off from power button [phone is vibrating a few times

]

4. Power-On phone

Phone Powered on, everthing is OK

5. type *#06#, what imei you see on LCD

*#06# = 355255016112340 (here first typing phone do not show any number, seccond typing gives this number,need to wait some secconds to see number before typing for this phone. this maybe just shown number, the cominication number maybe changed as below, I am not sure)

when read general information

Action: read information
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
Phone detected, wait...
Hardware version: AT+EGMR=0,0
Software version: AT+EGMR=0,3
Barcode: MT012345678901234567
imei: 356051009972483
Finished, time used: 14 sec
Power off phone now !

03-04-2008, 18:15	#7 (permalink)
KUBAT1 Registered User Join Date: Feb 2004 Location: MERSIN, TURKEY Posts: 1,260 Member: 55026 Status: Offline Thanks Meter: 53	mate! I said I did all you want before, the same, IMEI can not be changed!!! PLEASE URGENT HELP NEEDED, IT HAS BEEN 10 DAYS I AM WORKING ON THESE PHONES, FIRST I COULD NOT EDIT THIS FIRMWARE NOW CAN NOT WRITE IMEI, MY CLIENT IN HURRY, AND MAKES PROBLEM, NOW WAITING YOUR SOLUTION VERY URGENT.. regards 1. type #06#, what imei you see on LCD ? Typing #06#, Phone IMEI is 355255016112340 but when you read general information from software it is Action: read information Model: Autodetect 6205-6227 NOR Checking data, wait... Phone should be Switched ON ! Connecting, wait... Phone detected, wait... Hardware version: AT+EGMR=0,0 Software version: AT+EGMR=0,3 Barcode: MT012345678901234567 imei: 135790246811220 Finished, time used: 98 sec Power off phone now ! 2. write imei by mode 1 wri**** 35605100997248 to the phone with mode-1 Action: imei Model: Autodetect 6205-6227 NOR Checking data, wait... Phone should be Switched ON ! Connecting, wait... Phone detected, wait... Hardware version: AT+EGMR=0,0 Software version: AT+EGMR=0,3 Barcode: MT012345678901234567 imei: 135790246811220 imei write method: mode-1 new imei: 356051009972483 imei verified Ok Finished, time used: 13 sec Power off phone now ! 3. Power-Off phone with phone "Power" button but don't remove battery ! powered phone off from power button [phone is vibrating a few times ] 4. Power-On phone Phone Powered on, everthing is OK 5. type #06#, what imei you see on LCD #06# = 355255016112340 (here first typing phone do not show any number, seccond typing gives this number,need to wait some secconds to see number before typing for this phone. this maybe just shown number, the cominication number maybe changed as below, I am not sure) when read general information Action: read information Model: Autodetect 6205-6227 NOR Checking data, wait... Phone should be Switched ON ! Connecting, wait... Phone detected, wait... Hardware version: AT+EGMR=0,0 Software version: AT+EGMR=0,3 Barcode: MT012345678901234567 imei: 356051009972483 Finished, time used: 14 sec Power off phone now ! Last edited by KUBAT1; 03-04-2008 at 18:22.