here is flashbackup logs
OM3 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: read NOR flash
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6226:8A02:8A01]...
CPU: MT6226
high speed boot disabled
chip: 0031:ADC1
C9E
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
115200
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
it's time to stop: 290000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area#1 is Ok
security area#1 backup saved: E:\Program Files\InfinityBox\ChineseMiracle\backup_security\i d.49FF0391.[SZMI26_05C_ELITEK_PCB01_GPRS_MT6226_S01.SZMI26_S60 8L_ISES_D770_V2_0.BIN_42B2CA40].rpl
====================
New firmware detected:
SZMI26_05C_ELITEK_PCB01_GPRS_MT6226_S01.SZMI26_S60 8L_ISES_D770_V2_0.BIN
- make "Read full flash" operation
- send "backup_system_log_..." file to support:
[email protected]
- send flash backup file(s) to support:
[email protected]
- include in your e-mail full text from phone back label (phone name etc.)
====================
identification#1 detection finished
device-id: 49FF0391
identification#1 protocol ver: 04
ver. sw1: SZMI26_05C_ELITEK_PCB01_GPRS_MT6226_S01.SZMI26_S60 8L_ISES_D770_V2_0.BIN
ver. sw2: SZMI26_S608L_ISES_D770_V2.0, BF354DBD
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information not found,
if phone works well just ignore this warning
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset detected: 00E00000
flash: EC257E25082501:29EA0000000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom/ffs found near: 00E00000
detecting eeprom/ffs size...
eeprom/ffs size: 00200000
ffs chip: 00
eeprom/ffs area: 00000000:00E00000-00FFFFFF
Check firmware integrity Done
Check firmware content...
Check firmware content Done
Backup required data...
reading [flash[SZMI26_05C_ELITEK_PCB01_GPRS_MT6226_S01.SZMI26_S60 8L_ISES_D770_V2_0.BIN]]...
file saved: E:\Documents and Settings\sa40\Desktop\backup_flash[SZMI26_05C_ELITEK_PCB01_GPRS_MT6226_S01.SZMI26_S60 8L_ISES_D770_V2_0.BIN]_20080419-225041.B0M.bin
file saved: E:\Program Files\InfinityBox\ChineseMiracle\backup_system_log _49FF0391_SZMI26_05C_ELITEK_PCB01_GPRS_MT6226_S01. SZMI26_S608L_ISES_D770_V2_0.BIN_42B2CA40_20080419-225110.B0X.bin
Finished, time used: 1699 sec
Remove/Install battery now !