GSM-Forum - View Single Post - ** BB5 ASK->RPL explained step by step **

karwos · 04-20-2008, 09:46

1: Run KarwosSuite, select BB5 platform and transmission type (USB/FBUS)

2: Click ATTACH PHONE, phone will be scanned and attached, then select MEMORY tab

3: Click "Restore Certificates", software will contact our server, and if we will see message:
"Your ID is not authorized or no credits on account" that means account on server is empty or account was not found.

4: If account was found OK and credits were on account, you will see following message:
"ASK Successfully Queued for Calculation, Credits left on account: ***"

5: During next 48h (usually few minutes or hours) needs to repeat steps 1..4 to check if RPL came back, so click "Restore Certificates" again and if you will see:
"ASK Already found in queue, wait for calculation" - that means ASK is queued for calculation, need to wait and check again.

6: After RPL calculation we have 2 options:
1. Automatic RPL download and write into phone via KS (experimental options, MAY not work - still in testing), just need to click "RESTORE CERTIFICATES"
2. Download RPL, Save to file and write any through any 3rd party flasher - just tick "Save RPL to file" before "Restore Certificates"

04-20-2008, 09:46	#1 (permalink)
karwos No Life Poster Join Date: Feb 2005 Location: Poland Age: 34 Posts: 4,943 Member: 117496 Status: Offline Sonork: 100.83919 Thanks Meter: 22,689	BB5 ASK->RPL explained step by step 1: Run KarwosSuite, select BB5 platform and transmission type (USB/FBUS) 2: Click ATTACH PHONE, phone will be scanned and attached, then select MEMORY tab 3: Click "Restore Certificates", software will contact our server, and if we will see message: "Your ID is not authorized or no credits on account" that means account on server is empty or account was not found. 4: If account was found OK and credits were on account, you will see following message: "ASK Successfully Queued for Calculation, Credits left on account: ***" 5: During next 48h (usually few minutes or hours) needs to repeat steps 1..4 to check if RPL came back, so click "Restore Certificates" again and if you will see: "ASK Already found in queue, wait for calculation" - that means ASK is queued for calculation, need to wait and check again. 6: After RPL calculation we have 2 options: 1. Automatic RPL download and write into phone via KS (experimental options, MAY not work - still in testing), just need to click "RESTORE CERTIFICATES" 2. Download RPL, Save to file and write any through any 3rd party flasher - just tick "Save RPL to file" before "Restore Certificates"