tips to flash n1255 if ‘u have problem with n1255 only display battery indicator.
and only have rj cable 1255. you can flash it use CCS12R019 with mt-box com emulator.
- connected mt2com (mt-box com emulator)
set: VBAT:3.6V
VPP:0.0
- set port at control panel > Griffin Team Virtual Com
enter Properties > Port Setting > Advance > check “Use FIFO” > set Receice Buffer fr 14 to 4, and Transmit Buffer fr 16 to 4 > OK
- run CCS12R019
- insert rj 1255 cable to mt-box and the set
- klick *+5+on > until set detected at active phone
mode: COM2_Boot Loader Download Mode
- browse f/w (active bundle) – use f/w as your own language: *.cbb
otomatically detected file: Application, Language Pack dan File System
- klick “Update”
.. prosses.. done..
- release cable and check your set
i’ve tested it.! |