Quote:
Originally Posted by zone2  i have a sagem my220x to unlock-tried-but still in lock-logs as below
OM2 [Serial0] selected
Device: Sagem-my220x
Checking data, wait...
Action: unlock
unlock method-1
Boot...
Press and HOLD Power button now (if boot does not start remove/install batery) !
loading...
middle part...
next part...
boot answer: 01
Release Power button now
Boot Done
Set Baud...
115200
Set Baud Done
Connecting...
flash: 0001:011A
Connecting Done
Check hardware...
flash chip supported
Check hardware Done
Check parameters...
Check parameters Done
backup critical area...
reading [eeprom-sta]...
file saved: C:\Program Files\InfinityBox\Pana01\backup_Sagem-my220x_eeprom-sta_20080424-123046.B1E.bin
loading data...
data loaded
reading [eeprom-sec]...
file saved: C:\Program Files\InfinityBox\Pana01\backup_Sagem-my220x_eeprom-sec_20080424-123049.B1E.bin
reading [eeprom-complete]...
file saved: C:\Program Files\InfinityBox\Pana01\backup_Sagem-my220x_eeprom-complete_20080424-123055.B1E.bin
reading additional data...
done
backup critical area Done
Check memory...
current status: 0
Check memory Done
Write...
Erasing: lock-area
Writing: lock-area
Write Done
Finished, Remove/Install battery now !
Time used: 45 sec
Unlock instruction:
1. Power-On phone
2. Enter code: 12345678
what i do as a next step?
thank u |
you have to remember that this solfrware is under test i no and infinify team can fine soliution to this...