Quote:
Originally posted by DREAMGSM I measured the power consumption and was about 430-440 mAmp, then i changed the pa, reflow ccont, change ccont, try more pa´s, change all bga, ... lot of components like capacitors , resistors... on microscope all seem right, no sulfate, no shorts, no break lines... i´m will turn crazy
the phone is a 3310 and a 3330... any idea? |
HI,,
what capacitor you replaced ?
try to check all "big" capacitor which is connect to "VBATT"
and clean battery connector !
and aslo check VTX path !
or you can try give a resistor 22k or 68K from BSI to GND,
and use power supply give 4V to VB+ , and use wintesla to make TX outgoing power level at level 5, and see how is it current used, that 350~450 mA at level 5 is normal !
Willy