GSM-Forum - View Single Post - Solution : HOW TO FIND PIN OUT in SPD CPU

bestncheap · 06-02-2008, 07:43

How To Find Pin out with Ve_king

1. Run Ve-king s.w and then go to SCAN TAB
2. In Scan Tab, chose USB SCAN
3. Change to 6600M CPU
4. Select Correct Pin
5. Clip Negatif/Black Cable to Battery (-), then click scan Power.
s.w will find GND position.

6. Remove Clip and put on battery. Then Press SCAN USB.
s.w will find USBDM- and USBDP+
7. Move to tab DEFINE
8. If u want save the setting, in DEFINE TAB, Chose 18USB.
9. Write your model phone
10. Press save. So next time if got same phone dont need to find USB pinout again.
11. Then Press SET Define. Then we can use the s.w

Thank for Mentari/Along for made indonesian version.. i just translate to english version.

BR

bNc

06-02-2008, 07:43	#1 (permalink)
bestncheap No Life Poster Join Date: Jan 2003 Location: bestncheap Age: 43 Posts: 1,808 Member: 19785 Status: Offline Thanks Meter: 1,242	Solution : HOW TO FIND PIN OUT in SPD CPU How To Find Pin out with Ve_king 1. Run Ve-king s.w and then go to SCAN TAB 2. In Scan Tab, chose USB SCAN 3. Change to 6600M CPU 4. Select Correct Pin 5. Clip Negatif/Black Cable to Battery (-), then click scan Power. s.w will find GND position. 6. Remove Clip and put on battery. Then Press SCAN USB. s.w will find USBDM- and USBDP+ 7. Move to tab DEFINE 8. If u want save the setting, in DEFINE TAB, Chose 18USB. 9. Write your model phone 10. Press save. So next time if got same phone dont need to find USB pinout again. 11. Then Press SET Define. Then we can use the s.w Thank for Mentari/Along for made indonesian version.. i just translate to english version. BR bNc