GSM-Forum - View Single Post

sege · 06-19-2008, 07:38

Instruction : PINOUT DETECTION >>>

--------------------------------------------------------------------------------

MCTool support 2 methods of pinout search :
AutoFindPinout & EasyFindPinout
You may use AutoFindPinout usually because its more fast and no need to use external power/battery.
But if AutoFindPinout does not find the pinout (in some phones), you have to use EasyFindPinout method.

How to use AutoFindPinout:
-Select CPU Type, and Speed.
-If you set Speed to SuperFast, ignore this level, else, Set number of Pins (You can see number of pins on Cable sticker,e.g. L8A = 8 Pins)
-Connect phone, and connect Crocodiles (+ & -) instead of battery.
-If RED led blinks on box, Swap crocodiles on battery connector.
-Press & Keep Power button and press "AutoFindPinout"
(Do not release power button until the end)

How to use EasyFindPinout (Only for MTK CPU)
-Select Speed.
-Connect phone, connect crocodiles PLUS battery or External power (4.0V).
-Power ON phone.
-Press EasyFind Pinout.
(No need to press power button at all)

06-19-2008, 07:38	#20 (permalink)
sege Freak Poster Join Date: May 2005 Age: 43 Posts: 225 Member: 144154 Status: Offline Thanks Meter: 9	Instruction : PINOUT DETECTION >>> -------------------------------------------------------------------------------- MCTool support 2 methods of pinout search : AutoFindPinout & EasyFindPinout You may use AutoFindPinout usually because its more fast and no need to use external power/battery. But if AutoFindPinout does not find the pinout (in some phones), you have to use EasyFindPinout method. How to use AutoFindPinout: -Select CPU Type, and Speed. -If you set Speed to SuperFast, ignore this level, else, Set number of Pins (You can see number of pins on Cable sticker,e.g. L8A = 8 Pins) -Connect phone, and connect Crocodiles (+ & -) instead of battery. -If RED led blinks on box, Swap crocodiles on battery connector. -Press & Keep Power button and press "AutoFindPinout" (Do not release power button until the end) How to use EasyFindPinout (Only for MTK CPU) -Select Speed. -Connect phone, connect crocodiles PLUS battery or External power (4.0V). -Power ON phone. -Press EasyFind Pinout. (No need to press power button at all)