GSM-Forum - View Single Post - Axess Tel Axw-p800 Unlock Code Reader

vikassaini01 · 07-07-2008, 10:37

Here are stupids here !
When you dont know anything, then why do you waste time of others.

Dear user, i will explain you what u sud do to get ur 4-digit lock code for your Axesstel P-800 Model.

Softwares Needed : CDMA Workshop 2.7 Full cracked

Download Here :
http://www.vikasmp3.com/programming-...-any-password/

Hardware needed : ur phone, serial/usb data cable.

Procedure :
1. Connect ur phone with ur computer thru data cable.
2. Run CDMA Workshop (Yellow sphere with a star in middle ICON).
3. Under the settings : COM Settings (AT Mode), Select ur COM port
(For Serial Cable - COM1, if not works try COM2)
(For USB cable, first install ur usb drivers, then go to my computer.
Right click on it and select properties. go to Hardware tab and select Device Manager. Go to "Ports (COM & LPT)" and watch ur Device and COM port.
then select that COM Port in CDMA Workshop.
4. Click on Connect.
5. Then Press the "QCDM" Button.
Wait for a while until CDMA Workshop read data from your phone.
6.After reading get finished, u can see ur lock code towards left under the Item - Lock code.

If u still have any problem, just leave a request at

Code:

http://www.vikasmp3.com/request-here/

If u need pictures relating to all this procedure, also include it in ur request.

Hope. now u will be satisfied.

07-07-2008, 10:37	#9 (permalink)
vikassaini01 Major Poster Join Date: Apr 2008 Posts: 47 Member: 754452 Status: Offline Thanks Meter: 97	All are stupids ! Here are stupids here ! When you dont know anything, then why do you waste time of others. Dear user, i will explain you what u sud do to get ur 4-digit lock code for your Axesstel P-800 Model. Softwares Needed : CDMA Workshop 2.7 Full cracked Download Here : http://www.vikasmp3.com/programming-...-any-password/ Hardware needed : ur phone, serial/usb data cable. Procedure : 1. Connect ur phone with ur computer thru data cable. 2. Run CDMA Workshop (Yellow sphere with a star in middle ICON). 3. Under the settings : COM Settings (AT Mode), Select ur COM port (For Serial Cable - COM1, if not works try COM2) (For USB cable, first install ur usb drivers, then go to my computer. Right click on it and select properties. go to Hardware tab and select Device Manager. Go to "Ports (COM & LPT)" and watch ur Device and COM port. then select that COM Port in CDMA Workshop. 4. Click on Connect. 5. Then Press the "QCDM" Button. Wait for a while until CDMA Workshop read data from your phone. 6.After reading get finished, u can see ur lock code towards left under the Item - Lock code. If u still have any problem, just leave a request at Code: http://www.vikasmp3.com/request-here/ If u need pictures relating to all this procedure, also include it in ur request. Hope. now u will be satisfied.