View Single Post
Old 07-12-2008, 08:07   #3 (permalink)
urromeo
Freak Poster
 
Join Date: Jul 2005
Location: Pak
Age: 45
Posts: 252
Member: 162328
Status: Offline
Sonork: 100.1618216
Thanks Meter: 21
i flash with two files here is log

phone still dead plz help


ZTC-ZT6668E553_X9PAPAARTF_E553_GPRS_MT6226_S01.01_1__1 6m_Ru_Fr_En_Th_Vn_Cn_Hi_Cn_Ar.B0M.bin
ZTC-ZT6668-Smile_E553_X9PAPAARTF_E553_GPRS_MT6226_S01.01_1_16 m_Ru_Fr_En_Th_Ar_w_eeprom.B0M(3).bin

COM3 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection disabled
eeprom backup enabled, it may takes several minutes !
Action: write NOR flash
"smart write" active
write: Firmware
skip: Customization/Language Pack
skip: Customization
write: Eeprom/ffs
enhanced security fix enabled
Boot...
Press and HOLD Power button now !
baud autodetection active
19200 autodetect
Connecting, wait...
Initializing[6226:8A02:8A01]...
CPU: MT6226
high speed boot disabled
chip: 0031:6386:1681
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: EC257E25082501:76737200000000
flash: Samsung D 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:76737200000000
flash: Samsung D 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
460800
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: EC257E25082501:76737200000000
flash: Samsung D 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:76737200000000
flash: Samsung D 16Mb
it's time to stop: 76657273696F6E3A30320000000000000000000000000000
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
.
detection phase #2...
.................................................. .................................................. ............................
warning: identification#1 information not found, possible reasons:
.old firmware type w/o identification#1 data
.damaged firmware
.damaged hardware
if phone works fine just ignore this warning
detect device identification#1 finished
detect device identification#2...
detection phase #1...
.
warning: optional information not found,
if phone works well just ignore this warning
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset assigned: 00E00000
flash: EC257E25082501:76737200000000
checking area[00000000]: 00000000-00FFFFFF...
Can't detect eeprom/ffs area
Do you want to use standard ffs address: 00E00000 ?

If you are not sure that standard address is correct:
1. press "NO" and terminate current operation
2. make flash backup for emergency case
3. repeat required operation
standard ffs address selected by user
detecting eeprom/ffs size...
eeprom/ffs size: 00200000
ffs chip: 00
eeprom/ffs area: 00000000:00E00000-00FFFFFF
Check firmware integrity Done
Check firmware content...
Check firmware content Done
Backup required data...
reading [eeprom]...
file saved: H:\Program Files\InfinityBox\ChineseMiracle\eeprom_20080712-124628.B0E.bin
flash: EC257E25082501:76737200000000
Backup required data Done
Patch required data...
Patch required data Done
Special operation...
Special operation Done
Write...
detect device identification#1...
detection phase #1...
.
detection phase #2...
.................................................. .................................................. ............................
warning: identification#1 information not found, possible reasons:
.old firmware type w/o identification#1 data
.damaged firmware
.damaged hardware
if phone works fine just ignore this warning
detect device identification#1 finished
detect device identification#2...
detection phase #1...
.
warning: optional information not found,
if phone works well just ignore this warning
detect device identification#2 finished
security area#1 calculation...
done
Area: Firmware
flash: EC257E25082501:76737200000000
Write: Firmware
Area: Eeprom/ffs
flash: EC257E25082501:29EA0000000000
Write: Eeprom/ffs
detect device identification#2...
detection phase #1...
.
warning: optional information not found,
if phone works well just ignore this warning
detect device identification#2 finished
Write Done
Finalization...
Finalization Done
Finished, time used: 1402 sec
Remove/Install battery now !
  Reply With Quote
 
Page generated in 0.07496 seconds with 7 queries