04-16-2003, 18:43
|
#4 (permalink)
|
| No Life Poster
Join Date: Sep 2002 Location: Portugal
Posts: 8,530
Member: 15312
Status: Offline Sonork: 100.1576041 Thanks: 0
Thanked 1,045 Times in 341 Posts
| Re: How to Repair your dead SL45 / 6688
Quote: Originally posted by ardiw
How to Repair your dead SL45 / 6688
First, prepare these SW below:
1. All 3/4 2.0.5 crack by XzZ
2. SL45-19_01.flx
3. Logger & Map Maker
4. IMEI Writer
These all files are only work in Windows 98 SE
Get all SW files here:
http://groups.yahoo.com/group/teddy_gsm/
If you have have all those files, then follow these instructions bellow:
Before run the program, you must check the cable data, Baud Rate (115kb), and COM port!
1. Run Flasher (aall34 2.0.5_XzZ.exe)
- Load File Flash Image -> SL-19_01.flx.
- Choose 'Phone Type' -> SL45, DO NOT SELECT 6688, eventhough your mobile is 6688.
- Check 'Write Flash', 'Write IMEI', 'Burst Mode'.
- Leave blank IMEI number (000000-00-000000-0).
- Click 'Init Mobile' then push imediatelly your mobile button ON.
- Wait 'til the progress finish (Sending Application, Erase Blocks, Copy Program).
- If you failed in this step, just try again.
2. Run Log Reader (A3X#Part1.exe)
- Select 'Logger' Tab.
- Select 'Model' -> SL45, eventhough your mobile is 6688.
- Click 'Read Phone' then push imediatelly your mobile button ON.
- Wait 'til the progress finish and the Windows IMEI appears.
- Fill the 'New IMEI' with your mobile IMEI w/o last digit (eg. 350017-51-019823)
- Click 'Save Log', save the file into the folder and name it as your desire.
3. Run MAP Maker (A3X#Part2.exe)
- Select 'IMEI Change' Tab.
- Click 'Open Log', then select 'yourfile.log'.
- Click 'Save Map', save the file into the folder and name it as your desire.
4. Run MAP / IMEI Writer (Public4.exe)
- Select 'Write IMEI' Tab.
- Select 'Model' -> SL45, eventhough your mobile is 6688.
- Click 'Open Map', then select 'yourfile.map'.
- Click 'Write IMEI' then push imediatelly your mobile button ON.
- Wait 'til the progress done.
5. FINISH, Enjoy your mobile again ;-) | And why we canīt write a full flash (sl45/6688i) in Unisiemens, and correct IMEI with Ksie 5.1?
That was a good solution, sometime ago, but now itīs a waste of time and battery. And just using 2 programs...
Flash -> SL45i / 6688i http://www.drug-store.itgo.com/SiemensPageFirmSL45i.htm
Unisiemens: http://www.drug-store.itgo.com/SiemensPageFls.htm
Ksie5.1: http://www.drug-store.itgo.com/SiemensPageLog.htm
Best regards |
|
|  |