Well, don't know which was the problem... I downloaded pinfinder 1.11, connect pinfinder again, and now it works.....
But here is the real problem: (tried to read the flash)(the phone is a working model, all perfect, just wanted to translate it)
COM3 [VCP0] selected
Device: Autodetect 6228, 6230 NAND
Checking data, wait...
Action: read NAND flash
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6230:8A02:8A02]...
CPU: MT6230
high speed boot enabled
chip: 0031:200E:0001
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
version: 3.020C
loader: 3.748.0
NAND id: ECF10095
page size: 800+40
pages/block: 40
bits i/o: 08
address cycles: 04
blocks: 0400
NOR: 0000:000000000000 [00000000]
NAND: 00EC:00F100000095 [08400000]
NOR chip is not installed
Initialize Done
Set baud...
921600
Set baud Done
Identification...
reading structure area...
detecting structure...
warning: incorrect bootloader header: 5A5A5A5A5A5A5A5A5A5A5A5A5A5A5A5A
nfi area detection finished: failed
error: can't detect nand chip parameters, default values assigned
reading...
checking backup data integrity...
warning: incorrect bootloader header: 5A5A5A5A5A5A5A5A5A5A5A5A5A5A5A5A
nfi area detection finished: failed
warning: probably errors exist during flash read operation
file saved: D:\Archivos de programa\InfinityBox\ChineseMiracle\FLASH Original\CIPHONE_nand_probably_damaged_full_200808 10-205215.B4M.bin
Finished, time used: 4050 sec
Remove/Install battery now !
I uploaded the flash here:
http://rapidshare.com/files/13644832...5.B4M.bin.html
What could the problem be? MT6230 not fully supported yet?
Thanks in advance