View Single Post
Old 08-12-2008, 20:10   #2 (permalink)
DYNET
No Life Poster
 
DYNET's Avatar
 
Join Date: Jul 2006
Location: CHINA
Age: 34
Posts: 2,735
Member: 320363
Status: Offline
Sonork: 100.1578853
Thanks Meter: 3,938
...................

Sony Ericsson Unlock Code Instructions
Model : All SonyEricsson
  1. Power on your phone without SIM card or with Original one
  2. Press joystick left once
  3. Press * twice
  4. Press joystick left once
  5. Phone will say "Personalize with MNC2" or "Personalized with MNC3"
  6. Wait approximately 5 seconds
  7. The display will indicate "Network" and a picture of a closed padlock
  8. Press Select
  9. The display will indicate "Unlock (Net) 5" and "NCK:"
  10. You can now enter the supplied unlock code
  11. Phone will display "Network unlocked" and then "Insert SIM" message
  12. Your phone is unlocked

    If your phone has a jogdial press it down instead of joystick left.
    OR
1 - Switch ON your phone without SIM Card,
2 - Press 1 time the left arrow,
3 - Press 2 times the button * ,
4 - Press 1 time the left arrow,
5 - The message "Personalize with MNC2" will appear,
6 - You can now enter the Unlock Code
.


Sidekick / Hiptop
1 Insert a non accepted SIM card and turn on the Sidekick
2 A dialogue screen will prompt you to enter the code:

Title: Special Code Required
Dialog: Enter code to enable SIM
Box for Code: 1-8 digits
Options: Enable or Cancel
3 On you having entered the code a dialogue box will come up saying Authenticating code

In case you see the “Waiting for Activation Screen”, hit the Menu key and the letter L key at the same time. The menu key is the top left key. By doing this, the waiting screen will go away and you will be able to make calls. For best results, hold down Menu and the L key until the Waiting for Activation screen disappears.
4 Your Sidekick/Hiptop cell phone is now unlocked

Samsung

How to remove Phone freeze

A frequent reason for Freeze Code to be enabled is when user enters several erroneous NCK codes.

If your cell phone shows a "Phone Freeze" message use the first code to unfreeze it. Enter the 8-digit code with SIM card in the phone when the "Phone Freeze" message is displayed, then press OK button (middle buttom, depending on phone branding can be called differently).


You can now proceede to entering Network Unlock Code.

More.....
 
The Following 3 Users Say Thank You to DYNET For This Useful Post:
Show/Hide list of the thanked
 
Page generated in 0.08022 seconds with 7 queries