thread: sigmatet s1
View Single Post
Old 09-16-2008, 11:14   #3 (permalink)
jbbasha
Freak Poster
 
Join Date: Jun 2004
Location: jb cell world
Age: 43
Posts: 389
Member: 70916
Status: Offline
Thanks Meter: 55
Quote:
Originally Posted by THE ANT View Post
i have s1 its but phone general information
Code:
Action: read information
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
Phone detected, wait...
Hardware version: MT6225, E03
Hardware version: GINWAVE25_06B_HW
Software version: FXD-S1-ML_MR106_004_
Software date: 2006.06.14
Barcode: MT012345678901234567
imei: 135790246811220
Finished, time used: 45 sec
Power off phone now !
detailed information is here
ral
Code:
OM4 [VCP1] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: read/check detailed information
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6225:8A03:8A00]...
CPU: MT6225
high speed boot enabled
chip: 0001:ED03:000F
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
115200
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
it's time to stop: 18F09FE518F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [standard] generation
identification#1 protocol ver: 04
ver. sw1: GINWAVE25_06B_PCB01_GPRS_MT6225_S00.FXD-S1-ML_MR106_004_5S02-MC-C01-RF3198_V1_1_025_080411.BIN
ver. sw2: FXD-S1-ML_MR106_004_5S02-MC-C01-RF3198_V1.1.025_080411, 00000000
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information is not found,
if phone works well just ignore this warning
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset detected: 00E00000
flash: EC257E25082501:18E59F00000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom/ffs found near: 00E00000
detecting eeprom/ffs size...
eeprom/ffs size: 00200000
ffs chip: 00
eeprom/ffs area: 00000000:00E00000-00FFFFFF
detecting ffs structure pass 1...
.....................
detect standard fat location pass #1...
.......................................................
detect standard fat offset pass #1...
detect standard fat data...
fat layout detection complete
ffs element #1 detected ok
detecting ffs structure pass 2...
.....................
detect standard fat location pass #1...
.......................................................
detect standard fat offset pass #1...
detect standard fat data...
fat layout detection complete
ffs element #2 detected ok
Check firmware integrity Done
Check firmware content...
Check firmware content Done
Backup required data...
Finished, time used: 86 sec
Remove/Install battery now !
i need also file this ..GINWAVE25_06B_PCB01_GPRS_MT6225_S00.FXD-S1-ML_MR106_004_5S02-MC-C01-RF3198_V1_1_025_080411.BIN


read from working s1 phone
  Reply With Quote
 
Page generated in 0.10673 seconds with 6 queries