View Single Post
Old 05-06-2003, 12:03   #15 (permalink)
Freak Poster
Join Date: Jul 2002
Location: CAN
Posts: 159
Member: 13761
Status: Offline
Thanks Meter: 0
I still need flash for a800,s100 and s300, if anybody have please share...
I don't have those phones, what flash file codes?

anyone try to flash V205 with V200 flash file?
I flashed it and use for 3 weeks with no problem at all, even the camera.

Here step by step Upgrade V205 to V200.

OptiFlash (V20X) with flash file v20xewc2.s3, Unzip those all to one folder. (Windows XP Only)

Use Cable: V205/V200 (#PCB037DBE), R225, T100 and S300.

Added Features:
1. Hide Operation Logo, time and date.
2. Camera zoom.
3. Upload the cam pictures to PC.
4. Activate Folder Tone (same as S300).
5. More keypad tones (Cool & Piano).
6. New startup screen. (T-Mobile is gone)
7. More wallpapers.
8. Animation when searching service is different.
9. Restricted: Call Barring, Closed User Group.
10. MMS and WAP settings with out entering the code.
And more.........

************************************************** ************************************************** ****
How to BACKUP ...........

1) Open OptiFlash program go to Options\Settings\COM Port, set First COM Port only, disabled Second COM Port (none) .

2) Click READ tab deleted all the existing read ranges and add the following up ranges:

0x00000000 - 0x00000617
0x00004000 - 0x00007a43
0x00010000 - 0x00576a53
0x00700000 - 0x00cbd713

Then click on ok.

3) Take out the sim card, connect cable to phone and then click on will then ask to power on mobile, Press the pwr button on phone for about 1-2 seconds ( You will NOT see the phone come on!! ).

This will take about 10 or so mins to read the flash..file output is 34 mb. It will say "all is well" when its finished reading. remove battery and put it back on.

4) Now goto options settings FLASH & VERIFY tab then open the file that you just saved which is the flash of your own fone. Click ok and then click on VERIFY. If it verifies 100% it will say all is well. remove battery put it back on.

How to FLASH:
1) Goto options\settings\flash and verify, open the new v200 flash file its called v20xewc2.s3.

2) Clear Reserved memory regions (blank, no need to type in any range) .

3) Click on Generic tab, select Customer T1, v200 in specify hardware platform. Then press ok.

4) Click on FLASH buttom start to flash. software will then ask to power on mobile, Press the pwr button on phone for about 1-2 seconds ( You will NOT see the phone come on!! ). This process took about 20mins then it said all is well. At this point it was done.

5) Remove cable and battery, then put the battery back on then turned on the phone (without sim card).

9) When phone ask you to insert sim do this resets (each one will reboots then insert next code)

(After the phone reboots "Personalization Cancelled" should be displayed.)

10) SMILE ;-) It's done! Turn off the phone, insert sim card.

  Reply With Quote
Page generated in 0.10596 seconds with 6 queries